| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: save worker type before dropping its reference
io_wq_cancel_tw_create() inspects cb->func after calling
io_worker_cancel_cb(). For an existing worker, that call can drop the
last worker reference and wake io_worker_exit(). If the canceling task
is preempted, the worker can be unlinked and freed by kfree_rcu() before
the callback function is inspected. KASAN reports a slab-use-after-free
read in this path.
Save whether the callback belongs to an unpublished continuation worker
while its reference is still held, then use the saved result for the
conditional free. This preserves the existing accounting and frees only
the worker allocated for the canceled continuation. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: prevent file publication after tree disconnect
TREE_DISCONNECT closes the tree's published file handles before marking and
removing the tree connection. A concurrent CREATE that already holds a tree
reference can therefore publish its file after the close pass. When CREATE
drops its reference, the tree can be freed while the published file still
points to it.
Mark and remove the tree connection before closing its files, and serialize
both new-open and durable-reconnect volatile ID publication with that state
transition. An opener is then either published in time for the close pass
or rejected after disconnect with STATUS_NETWORK_NAME_DELETED.
Keep a tree reference while a file carries its tree pointer. This protects
asynchronous users that can defer the file's final destruction past tree
disconnect.
The close pass can race the successful FP_NEW to FP_INITED transition.
Take the opening request's file reference atomically with that transition.
This keeps the file alive until request completion even if teardown removes
the ID immediately.
BUG: KASAN: slab-use-after-free in proc_show_files (fs/smb/server/vfs_cache.c:126)
Read of size 4 at addr ff11000101540f80 by task poc/153
Call Trace:
proc_show_files (fs/smb/server/vfs_cache.c:126)
seq_read_iter (fs/seq_file.c:231)
proc_reg_read_iter (fs/proc/inode.c:299)
vfs_read (fs/read_write.c:574)
ksys_read (fs/read_write.c:716)
do_syscall_64 (arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Allocated by:
ksmbd_tree_conn_connect (fs/smb/server/mgmt/tree_connect.c:35)
smb2_tree_connect (fs/smb/server/smb2pdu.c:2819)
handle_ksmbd_work (fs/smb/server/server.c:368)
Freed by:
kfree (mm/slub.c:6801)
handle_ksmbd_work (fs/smb/server/server.c:332) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_crtc: ensure dma_fence_ops remain valid during device unbind
In [1], sashiko reported the following issue:
=== snip ===
Looking at how these fences are managed, drm_crtc_create_fence()
creates a dma_fence without taking a reference to the drm_device or
drm_crtc. Because the sync_file framework exposes this fence to
userspace, the fence can outlive the CRTC.
The dma_fence contract requires that data accessed by dma_fence_ops
(like get_driver_name) must remain valid for an RCU grace period after
the fence is signaled. However, drm_crtc_cleanup() and the subsequent
freeing of the device do not wait for an RCU grace period via
synchronize_rcu().
If userspace calls ioctl(SYNC_IOC_FILE_INFO) concurrently with a device
hot-unplug:
CPU1 (Userspace)
sync_file_get_name()
ops = rcu_dereference(fence->ops);
if (!dma_fence_test_signaled_flag())
// Preempted or delayed here
CPU2 (Driver Teardown)
Signals the fence (setting fence->ops = NULL)
Destroys and frees the CRTC without waiting for an RCU grace period
CPU1 (Resumes)
ops->get_driver_name(fence) -> drm_crtc_fence_get_driver_name()
crtc = fence_to_crtc(fence); // Casts to the freed CRTC
return crtc->dev->driver->name; // Use-after-free
...
Does the CRTC or DRM device need to be kept alive for the RCU grace
period, or should the fence hold a proper reference to prevent the
use-after-free when get_driver_name() and get_timeline_name() access
the freed CRTC structure?
=== snap ===
I believe this to be a correct observation and this patch implements
the suggestion of waiting for an RCU grace period before proceeding
with destruction of the drm_crtc, so that get_driver_name() and
get_timeline_name() can still work. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: stop originator purge worker before freeing TT
batadv_mesh_free() releases the translation tables via batadv_tt_free()
before batadv_originator_free() stops orig_work. The purge worker can
therefore still run while the TT is torn down. When an originator times
out, batadv_purge_orig_ref() calls batadv_tt_global_del_orig(), which
loads tt.global_hash and walks all buckets while taking their locks:
CPU0 CPU1
batadv_tt_free() batadv_purge_orig()
batadv_tt_global_del_orig()
hash = ...tt.global_hash;
batadv_tt_global_table_free()
batadv_hash_destroy(hash);
spin_lock_bh(&hash->list_locks[i]);
Disable orig_work at the beginning of batadv_mesh_free(), directly after
the mesh was marked as deactivating. The second
disable_delayed_work_sync() in batadv_originator_free() is harmless because
it is free'd anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams
When sdw_enable_stream() fails in intel_ace2x_bpt_send_async() after
hda_sdw_bpt_send_async() has already started the TX and RX DMA streams,
intel_ace2x_bpt_close_stream() invokes hda_sdw_bpt_close() directly
without calling hda_sdw_bpt_wait(). As a result,
hda_sdw_bpt_dma_deprepare() tears down the DMA buffers and BDL while
the DMA hardware is still running.
Disable any running TX or RX BPT DMA stream at the start of
hda_sdw_bpt_close() before unmapping channels and depreparing DMA
resources. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: finish fault cleanup before dropping the fault lock
On a retried fault, a fatal signal interrupting the folio lock wait
makes lock_folio_maybe_drop_mmap() drop the fault lock without pinning
the file. However, filemap_fault() may still need to release
mapping->invalidate_lock. A concurrent munmap() can release the last
file reference and free the mapping before that unlock.
Defer dropping the fault lock to filemap_fault()'s retry cleanup, after
releasing invalidate_lock. If the fault lock was already dropped for
I/O, release the existing file reference instead. Keep the fault lock
held for FAULT_FLAG_RETRY_NOWAIT as before. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cache the mount context for dentry lock callbacks
ocfs2_drop_dentry_lock() drops the inode reference before releasing the
DENTRY lock. This lets inode eviction release the local inode and open
locks before a remote unlink can proceed past the DENTRY lock.
A DLM callback can still arrive before the DENTRY lock has been dropped.
ocfs2_get_dentry_osb() obtains the mount context through dl_inode->i_sb,
which can access a freed inode when the downconvert thread drops the
last inode reference in its post-unlock callback:
Downconvert thread DLM callback thread
------------------ -------------------
ocfs2_process_blocked_lock()
ocfs2_dentry_post_unlock()
ocfs2_dentry_lock_put()
ocfs2_drop_dentry_lock()
iput(dl->dl_inode)
[inode reclaimed after RCU]
ocfs2_blocking_ast()
ocfs2_get_dentry_osb()
dl->dl_inode->i_sb
ocfs2_simple_drop_lockres()
Store the mount context in the DENTRY lock resource's l_priv field and use
the default mount-context lookup. Recover the containing dentry lock with
container_of(), as already done for refcount locks, and remove
ocfs2_get_dentry_osb(). ocfs2_dismount_volume() shuts down the DLM before
freeing the mount context, so callbacks can use it without accessing the
inode. Preserve the existing iput-before-unlock order to avoid delaying
local inode and open lock release until after the DENTRY lock is released. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_qfq: prevent aggregate self-replacement
qfq_change_class() snapshots the current aggregate settings while
holding the qdisc tree lock, but drops the lock before selecting the
destination aggregate. During that gap, qfq_enqueue() can move the
class to an aggregate matching the requested settings.
When qfq_change_class() resumes, qfq_find_agg() then returns cl->agg.
If it is a singleton, qfq_deact_rm_from_agg() frees the aggregate
before qfq_add_to_agg() immediately accesses the same pointer, causing
a use-after-free.
While holding the tree lock, skip the replacement when the destination
is already the current aggregate. Any estimator replacement has already
completed, so the class change can finish normally. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/virtio: Reset device before deleting virtqueues on probe failure
viommu_probe() marks the device DRIVER_OK before populating the event
virtqueue and registering the IOMMU device in sysfs. viommu_fill_evtq()
hands the device a set of device-writable buffers through
virtqueue_add_inbuf(), so from that point on the device may write into
them and into the rings.
If either step fails, the error path deletes the virtqueues without
resetting the device first. The event buffers are allocated with
devm_kmalloc_array() and are released as probe unwinds, so the device can
go on writing to memory that has been freed.
Reset the device before deleting the virtqueues, the way viommu_remove()
already does. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: mark the inode preallocated for pNFS write layouts past EOF
xfs_fs_map_blocks() marks the inode XFS_DIFLAG_PREALLOC only when it
allocates blocks for a write layout. A write layout past EOF can also
hand out allocated blocks, such as speculative preallocation. blockgc
then frees them under the layout, and another file may get them.
Mark the inode whenever a write mapping ends past EOF. |
| In the Linux kernel, the following vulnerability has been resolved:
net: restore refcount ordering for lockless socket access
Before commit fb041bb7c0a9 ("locking/refcount: Consolidate implementations
of refcount_t"), default builds implemented refcount_inc_not_zero() using
atomic_add_unless(), which provided full memory ordering on success. The
commit removed that ordering on weakly ordered architectures, allowing
accesses after a successful reference acquisition to be reordered before
it.
Use refcount_inc_not_zero_acquire() in the IPv4 and IPv6 established
lookups and in inet_twsk_purge(), where the socket is validated again
after taking a reference.
bpf_sk_assign() can receive a socket pointer obtained through BTF
without a reference. Use acquire ordering when it takes its own reference
for a refcounted socket.
Use refcount_set_release() when setting refcounts in the SYN cookie,
TCP Fast Open, request migration, and TIME_WAIT paths. Keep the existing
TIME_WAIT smp_wmb(), which separately orders the refcount store before
ehash publication. |
| In the Linux kernel, the following vulnerability has been resolved:
can: protect the receive lists with a per-device lock
The receive lists of a CAN device are located in the device's
can_ml_priv and travel with the device when it is moved to another
network namespace. But they are protected by the per-netns
rcvlists_lock. So can_rx_unregister() needs dev_net(dev) to pick the
right lock and silently returns when the passed namespace does not
match dev_net(dev) anymore.
isotp_release() and bcm_release() leave their notifier list before they
take any lock that serializes against the netdev notifier, which runs
under RTNL. When the bound device is moved to another namespace in this
window, the notifier skips the socket and the release path has to remove
the filters itself. isotp_release() passes the socket's namespace, which
does not match dev_net(dev) anymore. bcm_rx_unreg() passes dev_net(dev),
which can_rx_unregister() reads again for its check, so a namespace
change between both reads makes the check fail as well. In both cases
can_rx_unregister() silently returns. As can_rx_register() stores
rcv->sk without a reference, the remaining receivers point to the freed
socket (isotp) or the freed op (bcm):
BUG: KASAN: use-after-free in isotp_rcv+0x1570/0x24d0
Read of size 1 at addr ffff888118130552 by task isotp_ns_uaf/578
can_rcv_filter+0x4af/0x8c0
can_receive+0x28d/0x3c0
can_rcv+0x2a9/0x310
__netif_receive_skb_one_core+0x21a/0x260
process_backlog+0x210/0x760
Besides this, the lists of a device are protected by the rcvlists_lock
of the namespace that is passed in. Callers which pass dev_net(dev) read
it at different times, so the same lists may be modified under the locks
of different namespaces while the device is moved.
Taking RTNL in these release paths is no option: raw_bind(),
raw_setsockopt() and raw_release() already hold RTNL while adding and
removing up to CAN_RAW_FILTER_MAX filters per socket, which unprivileged
users can trigger repeatedly and which makes RTNL a global bottleneck.
Instead fix the root cause and add a spinlock to struct
can_dev_rcv_lists, which protects the receive lists of a CAN device or
the 'any' CAN device lists of a namespace. It is initialized in
can_set_ml_priv(), which is used by all CAN network devices. With this,
can_rx_unregister() finds the subscription independently of the
current namespace of the device. The protocols keep the device valid
with their tracked references. The per-netns rcvlists_lock only protects
the receive list statistics anymore, and CAN_RAW, CAN_BCM and CAN_ISOTP
pass the namespace that has been used for can_rx_register().
So isotp_release() and bcm_release() now remove their filters correctly
without RTNL, and raw_release(), raw_setsockopt(), raw_bind() and
isotp_bind() do not need RTNL anymore and add and remove their filters
under lock_sock(). To serialize bind() with NETDEV_UNREGISTER, bind()
publishes the device inside the RCU section of its lookup, and
raw_notify() and isotp_notify() recheck the bound device under lock_sock().
As RTNL does not keep NETDEV_DOWN out of bind() anymore, bind() checks
IFF_UP after publishing the bound device, with a barrier pair against
raw_notify() and isotp_notify(), so a down transition during bind() is
still reported with ENETDOWN. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/ksm: fix use of a freed anon_vma at swap-in
A folio read from a swap slot previously shared by KSM can remain in the
swap cache after the process that first mapped it exits. Its anon_vma
can then be freed, so ksm_might_need_to_copy() must not dereference it
to compare roots.
Doing so can result in some false-positives, resulting in the reverse
mapping missing the new folio mapping, preventing migration and reclaim.
SLAB_TYPESAFE_BY_RCU allows individual anon_vma objects to be reused
immediately after freeing. A stale pointer can then refer to another
anon_vma whose root matches, even though the target VMA is not linked
to that anon_vma.
Move the anonymous rmap compatibility checks into
folio_anon_rmap_compatible(). Keep the page-index check and compare the
folio's anon_vma pointer against the VMA's own anon_vma and root first.
If neither matches, bite the bullet and walk the VMA's anon_vma_chain.
The VMA keeps these anon_vmas alive, and finding a match guarantees that
reverse mapping can find the new mapping.
Lorenzo Stoakes says in a private discussion:
"This isn't quite equivalent to the existing check.
Every anon_vma in an anon_vma_chain shares the same root, but if you
split a VMA then fork both of them like this:
VMA A
/ \ <split>
VMA B VMA C
\ /
root <- anon_vma 1
----^ ^---- <fork>
/ parent \
anon_vma 2 anon_vma 3
| |
VMA D VMA E
VMA's D and E both get their own new
anon_vma's such that:
VMA D: anon_vma 2 -> anon_vma 1 -> root
VMA E: anon_vma 3 -> anon_vma 1 -> root
And if you found a folio referencing anon_vma 2, the existing check:
anon_vma->root == vma->anon-vma->root
Would be true for VMA's B, C, D & E.
However after your change it'd be true for VMA D only, as it's the only
one with anon_vma 2 in its anon_vma_chain.
Whether or not that could actually happen in practice... 🙂 I don't
know.
[...] after your change it'd be true for VMA D only, as it's the only
one with anon_vma 2 in its anon_vma_chain. [...] I would [...] say that
you are making the test stricter but more correct.
"
If this affects performance when KSM was never even involved, we could
just track whether KSM ever merged anything and just skip these checks.
There isn't really a lot we can do otherwise: for mapped folios we might
be able to use folio_get_anon_vma(), but for unmapped folios there really
is no easy way to see if the anon_vma is still valid.
Document the (confusing) lifetime requirements of folio_anon_vma(). |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: do not use Fast Open on MP_JOIN subflows
tcp_fastopen_create_child() hands the SYN packet itself to
subflow_syn_recv_sock(). For an MP_JOIN request this takes the
fatal fallback: the cloned child is destroyed and handed back with
drop_req flagged, but tcp_fastopen_create_child() does not check
the flag and queues it, so accept() can expose the freed child.
MP_JOIN cannot use Fast Open: data on a subflow requires the
completed HMAC exchange (RFC 8684, sec. 3.2). Refuse it (only the
TFO path passes a SYN skb here) and let tcp_conn_request() fall
back to the regular MP_JOIN handshake; also strip the Fast Open
cookie from MP_JOIN SYN/ACKs.
[ Moving code to avoid clearing TS and consolidating checks. ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx12: disallow GFXOFF while updating the SPM VMID
gfx_v12_0_update_spm_vmid() does a read-modify-write of RLC_SPM_MC_CNTL
over MMIO without keeping GFX powered, unlike gfx11. When GFX is in
GFXOFF at that point the update doesn't stick, and with the SPM VMID
programmed on submission again, the job of a process with a reserved
VMID can still run with the SPM writing through VMID 0.
On navi48, after a few other submissions and a VM fault on the same VM,
a COPY_DATA of RLC_SPM_MC_CNTL from such a job reads 0 although the
update was called for it:
$ amd_uapi_regression --run-subtest cs-secure-ib-compute,gem-mapping-info-high-va,gpuvm-fault-high-va,reserved-vmid-spm-vmid
amdgpu 0000:03:00.0: [gfxhub] page fault (src_id:0 ring:40 vmid:7 pasid:185)
amdgpu 0000:03:00.0: Faulty UTCL2 client ID: SDMA1 (0xe)
RLC_SPM_MC_CNTL in the job: 0x00000000
With GFXOFF disallowed around the update it reads the reserved VMID 15.
(cherry picked from commit 907aebc5578ae09fa5c0e2f0784201295837e60b) |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: kernel: use RCU to free endpoint listeners
mptcp_pm_nl_create_listen_socket() starts the TCP listener directly
instead of going through mptcp_listen(). It consequently misses setting
SOCK_RCU_FREE on the parent MPTCP socket.
tcp_child_process() can invoke the listener's subflow_data_ready()
callback without holding the MPTCP parent lock or a reference to the
parent. An authenticated MP_JOIN racing with endpoint teardown can
therefore access the parent after its last reference has been dropped.
The ADD_ADDR error path can also close an already published listener.
Set SOCK_RCU_FREE before __inet_listen_sk() publishes the TCP listener,
matching mptcp_listen(). This protects the parent on every subsequent
close path, including a failed endpoint addition. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: re-point retained control chunks on association migration
sctp_sock_migrate() transfers DATA chunk ownership but leaves retained
control chunks pointing at the old socket. A later retransmission can
therefore access the socket after it has been freed.
Extend the migration walk to cover retained control chunks and use
sctp_control_set_owner_w() to assign their new owner. Reuse the DATA
ownership check so each chunk is processed once per pass, even when it
is reachable through multiple lists or retained pointers.
Preserve a control chunk's existing authentication key across migration
so its final release can still generate SCTP_AUTH_FREE_KEY when needed. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize directory emptiness checks with readdir
SMB2 QUERY_DIRECTORY holds fp->readdir_lock while it calls iterate_dir()
on fp->filp. An SMB2 SET_INFO request with FILE_DISPOSITION_INFORMATION
can resolve the same FileId and call ksmbd_vfs_empty_dir() on the same
filp without that lock.
iterate_dir()'s inode read lock permits concurrent readers and does not
serialize per-file iterator state. ext4 stores its dx readdir cursor and
fname RB tree in file->private_data. Concurrent reset or refill can
therefore free a fname node while the other worker still traverses it or
retains its RB-tree link, resulting in use-after-free accesses.
An authenticated SMB client with list and delete rights on a directory in
a writable KSMBD share backed by ext4 can trigger this when the directory
takes the dx readdir path. The client overlaps an SMB2 QUERY_DIRECTORY
request with an SMB2 SET_INFO request carrying FILE_DISPOSITION_INFORMATION
on one live FileId.
In one x86_64 SMP KASAN multi-shot guest using ksmbd-for-next at
171df27077fb, the unmodified kernel reported a cross-worker use-after-free
before a panic. The first report's access and free stacks show the two
request paths directly (trimmed):
BUG: KASAN: slab-use-after-free in ext4_htree_store_dirent+0x488/0x550
Read of size 8 by task kworker/2:0/29
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
ext4_htree_store_dirent+0x488/0x550
htree_dirblock_to_tree+0x535/0x990
ext4_htree_fill_tree+0x319/0xba0
ext4_readdir+0x175a/0x2f40
iterate_dir+0x1b6/0x630
smb2_query_dir+0x1003/0x1cc0
Freed by task 279:
free_rb_tree_fname+0x67/0xc0
ext4_readdir+0x13a9/0x2f40
iterate_dir+0x1b6/0x630
ksmbd_vfs_empty_dir+0xa2/0x100
smb2_set_info+0x2ffa/0x45d0
Take fp->readdir_lock across the entire emptiness check. This places both
iterators over that handle's filp in the same lock domain while
preserving the disposition status handling. The exact code change
completed a warning-free x86_64 KASAN bzImage build. Tracing three request
pairs showed that the two iterate_dir() calls no longer overlapped and the
expected statuses were preserved. A further 1,600 reproducer iterations
completed with expected statuses and no KASAN report, Oops, or panic.
The reproducer and complete guest configuration are available privately
to maintainers on request. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flower: avoid stale mask references after delete
Flower releases a mask reference when a filter is removed from the
classifier. The filter object can remain alive while dump, walk, or
hardware reoffload paths hold a reference to it. Those paths can then
dereference f->mask after the mask has already been released.
Keep the mask reference until the filter reference count reaches zero.
Release the mask synchronously from the final __fl_put() while the caller
still holds the tcf_proto reference, and leave the existing RCU work to
free the mask. This keeps the mask available to every reader that still
holds the filter.
The filter is still removed from the classifier indexes immediately.
Therefore, a deleted filter can temporarily retain an otherwise empty
mask; fl_delete() uses the handle IDR, rather than the mask list, to
determine whether the classifier has become empty.
Failed mask assignment can leave fnew->mask as an error or borrowed
pointer without an owned mask reference. Clear it before the common
failure path so the final put cannot release an unowned reference.
This fix does not add fields, snapshots, or per-filter memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix parent dentry lifetime in directory enumeration
ksmbd_populate_dot_dotdot_entries() builds the ".." entry from
the open directory's d_parent and passes that pointer to
ksmbd_vfs_fill_dentry_attrs() without taking a reference. That pointer
is only valid while the directory stays under this parent. If a
concurrent rename moves the directory elsewhere, the old parent loses
its last reference; a following rmdir then turns it into a negative
dentry with d_inode cleared, and after the RCU grace period the dentry
itself is freed. The worker still holds the raw pointer and
dereferences d_inode through vfs_getattr() and vfs_getxattr().
A remote SMB client, authenticated or guest, triggers this by listing
a directory while that directory is moved under a new parent and the
old parent is deleted. It can be done by the client itself with write
access or by other concurrent writers, triggering null-ptr-deref and
slab-use-after-free on a KASAN build.
KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:xattr_permission+0x9d/0x160
Call Trace:
vfs_getxattr+0x9c/0x1b0
ksmbd_vfs_getxattr+0x82/0x100
ksmbd_vfs_get_dos_attrib_xattr+0x7f/0x130
ksmbd_vfs_fill_dentry_attrs+0x435/0x650
ksmbd_populate_dot_dotdot_entries+0x25e/0x630
smb2_query_dir+0xcf9/0x1a20
handle_ksmbd_work+0x5f1/0x1c80
process_one_work+0x90b/0x19d0
Fix by using the dentry reference counting APIs: take the parent with
dget_parent(), take a matching dget() on ".", and dput() the dentry
once ksmbd_vfs_fill_dentry_attrs() has returned or the pattern does
not match. |