{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2026-64117", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2026-07-19T07:54:57.035Z", "datePublished": "2026-07-19T15:40:16.941Z", "dateUpdated": "2026-08-05T12:39:26.505Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-08-05T12:39:26.505Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwifi: mac80211: capture fast-RX rate before mesh reuses skb->cb\n\nieee80211_invoke_fast_rx() reads RX status through\nIEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage\nthat ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the\nunicast forward path, mesh_data does:\n\n\tinfo = IEEE80211_SKB_CB(fwd_skb);\n\tmemset(info, 0, sizeof(*info));\n\non the same skb the caller still names via rx->skb, then either\nqueues the skb for TX (success) or kfree_skb()'s it (no-route)\nbefore returning RX_QUEUED. The caller's RX_QUEUED arm then\ncalls sta_stats_encode_rate(status) on memory that is either\nzeroed (success path) or freed (no-route path). The latter is\nKASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.\n\nFix by encoding the rate from status before invoking\nieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value\ncaptured while status was still backed by valid memory."}], "metrics": [{"cvssV3_1": {"version": "3.1", "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "baseScore": 8.8, "baseSeverity": "HIGH"}, "scenarios": [{"lang": "en", "value": "AV:A - The bug is reached when mac80211 processes attacker-supplied 802.11 data frames received over WiFi in a mesh deployment; per kernel CNA guidance, WiFi frame delivery is Adjacent rather than fully remote Network.\nAC:L - Once on a mesh network as an authorized peer, an attacker can reliably trigger the no-route unicast forward path by sending frames to destinations without an active mesh path, causing deterministic skb free followed by the UAF read.\nPR:N - Exploitation requires no privileges on the victim host; the attacker only needs to transmit valid mesh data frames from an adjacent peer, not local root, capabilities, or namespace admin rights on the target system.\nUI:N - No victim user action is required beyond normal mesh operation; the bug fires automatically during RX processing of the attacker's frames.\nS:U - Impact is confined to kernel/mac80211 memory on the receiving system and does not cross a VM, container, or IOMMU security boundary.\nC:H - The flaw is a slab use-after-free read of skb->cb via sta_stats_encode_rate(), which can expose freed heap contents and is classified as high confidentiality impact for UAF bugs.\nI:H - Use-after-free of skb control-block memory provides a standard heap corruption primitive that can be developed into arbitrary kernel writes or code execution, not merely a benign stats miscalculation.\nA:H - The freed-skb path produces KASAN-reported slab use-after-free and can cause kernel oops or panic; the condition is repeatable by sending additional triggering frames for denial of service."}]}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["net/mac80211/rx.c"], "versions": [{"version": "3468e1e0c639032a603450f0830ccabfa76f5806", "lessThan": "2fb64f94f9afb774f2fa0c7835727d7a67f89f07", "status": "affected", "versionType": "git"}, {"version": "3468e1e0c639032a603450f0830ccabfa76f5806", "lessThan": "d71c841be5d9e586ee7f36c0dc8ed4db0d9a1349", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["net/mac80211/rx.c"], "versions": [{"version": "6.4", "status": "affected"}, {"version": "0", "lessThan": "6.4", "status": "unaffected", "versionType": "semver"}, {"version": "7.0.11", "lessThanOrEqual": "7.0.*", "status": "unaffected", "versionType": "semver"}, {"version": "7.1", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.4", "versionEndExcluding": "7.0.11"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.4", "versionEndExcluding": "7.1"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/2fb64f94f9afb774f2fa0c7835727d7a67f89f07"}, {"url": "https://git.kernel.org/stable/c/d71c841be5d9e586ee7f36c0dc8ed4db0d9a1349"}], "title": "wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"affected": [{"affectedData": [{"defaultStatus": "unaffected", "product": "Linux", "programFiles": ["net/mac80211/rx.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"lessThan": "2fb64f94f9afb774f2fa0c7835727d7a67f89f07", "status": "affected", "version": "3468e1e0c639032a603450f0830ccabfa76f5806", "versionType": "git"}, {"lessThan": "d71c841be5d9e586ee7f36c0dc8ed4db0d9a1349", "status": "affected", "version": "3468e1e0c639032a603450f0830ccabfa76f5806", "versionType": "git"}]}, {"defaultStatus": "affected", "product": "Linux", "programFiles": ["net/mac80211/rx.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"status": "affected", "version": "6.4"}, {"lessThan": "6.4", "status": "unaffected", "version": "0", "versionType": "semver"}, {"lessThanOrEqual": "7.0.*", "status": "unaffected", "version": "7.0.11", "versionType": "semver"}, {"lessThanOrEqual": "*", "status": "unaffected", "version": "7.1", "versionType": "original_commit_for_fix"}]}], "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"}], "configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "6DB089D5-12E2-4857-A953-9ACB25560B98", "versionEndExcluding": "7.0.11", "versionStartIncluding": "6.4", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc1:*:*:*:*:*:*", "matchCriteriaId": "B1EF7059-E670-45F4-B422-54C40FA86390", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc2:*:*:*:*:*:*", "matchCriteriaId": "0D38F0BF-A728-4133-A358-D44A2F7EE6D6", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc3:*:*:*:*:*:*", "matchCriteriaId": "EC732D08-5F7B-46D9-B154-E60C7F4F0A97", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc4:*:*:*:*:*:*", "matchCriteriaId": "E5910A9D-F60A-409A-B486-FE66BFEBA9B9", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwifi: mac80211: capture fast-RX rate before mesh reuses skb->cb\n\nieee80211_invoke_fast_rx() reads RX status through\nIEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage\nthat ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the\nunicast forward path, mesh_data does:\n\n\tinfo = IEEE80211_SKB_CB(fwd_skb);\n\tmemset(info, 0, sizeof(*info));\n\non the same skb the caller still names via rx->skb, then either\nqueues the skb for TX (success) or kfree_skb()'s it (no-route)\nbefore returning RX_QUEUED. The caller's RX_QUEUED arm then\ncalls sta_stats_encode_rate(status) on memory that is either\nzeroed (success path) or freed (no-route path). The latter is\nKASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.\n\nFix by encoding the rate from status before invoking\nieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value\ncaptured while status was still backed by valid memory."}], "id": "CVE-2026-64117", "lastModified": "2026-08-18T12:43:41.673", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "ADJACENT_NETWORK", "availabilityImpact": "HIGH", "baseScore": 8.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 2.8, "impactScore": 5.9, "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "type": "Secondary"}]}, "published": "2026-07-19T16:17:53.217", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/2fb64f94f9afb774f2fa0c7835727d7a67f89f07"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/d71c841be5d9e586ee7f36c0dc8ed4db0d9a1349"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-416"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb", "id": "2502477", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2502477"}, "csaw": false, "cvss3": {"cvss3_base_score": "7.0", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H", "status": "draft"}, "cwe": "CWE-825", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nwifi: mac80211: capture fast-RX rate before mesh reuses skb->cb\nieee80211_invoke_fast_rx() reads RX status through\nIEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage\nthat ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the\nunicast forward path, mesh_data does:\ninfo = IEEE80211_SKB_CB(fwd_skb);\nmemset(info, 0, sizeof(*info));\non the same skb the caller still names via rx->skb, then either\nqueues the skb for TX (success) or kfree_skb()'s it (no-route)\nbefore returning RX_QUEUED. The caller's RX_QUEUED arm then\ncalls sta_stats_encode_rate(status) on memory that is either\nzeroed (success path) or freed (no-route path). The latter is\nKASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.\nFix by encoding the rate from status before invoking\nieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value\ncaptured while status was still backed by valid memory.", "A flaw was found in the Linux kernel's mac80211 Wi-Fi subsystem. This use-after-free vulnerability arises from incorrect handling of fast-RX rate data during mesh processing. This can lead to memory corruption, which an attacker could potentially exploit to cause a system crash (denial of service) or, in some cases, execute unauthorized code."], "name": "CVE-2026-64117", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Out of support scope", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/a:redhat:hummingbird:1", "fix_state": "Not affected", "impact": "important", "package_name": "erlang27", "product_name": "Red Hat Hardened Images"}], "public_date": "2026-07-19T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2026-64117\nhttps://nvd.nist.gov/vuln/detail/CVE-2026-64117\nhttps://lore.kernel.org/linux-cve-announce/2026071923-CVE-2026-64117-34d1@gregkh/T"], "threat_severity": "Moderate"}

{"affected": [{"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[3468e1e0c639032a603450f0830ccabfa76f5806,2fb64f94f9afb774f2fa0c7835727d7a67f89f07)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[3468e1e0c639032a603450f0830ccabfa76f5806,d71c841be5d9e586ee7f36c0dc8ed4db0d9a1349)"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}, {"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "generic", "value": "6.4"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[0,6.4)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[7.0.11,7.1.0)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[7.1,*]"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}], "created": "2026-07-21T12:15:02.682897+00:00", "updated": "2026-08-18T15:45:06.348931+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}