In the Linux kernel, the following vulnerability has been resolved:

power: supply: charger-manager: register regulators before exposing sysfs

charger_manager_remove() and the err_reg_extcon probe error path free each
charger regulator with regulator_put() before tearing down the power_supply
sysfs entries (power_supply_unregister()). charger_manager_remove() also
calls try_charger_enable(cm, false) after the regulator_put() loop. A
concurrent write to a charger's externally_control sysfs attribute that
lands between regulator_put() and power_supply_unregister() can run
charger_externally_control_store() and call try_charger_enable(), which,
when charging is enabled, dereferences the already-freed consumer handle.
When charging is enabled, try_charger_enable(cm, false) in .remove() also
dereferences the freed handles directly. Both leave use-after-free windows.
Symmetrically, probe registers the sysfs entries (power_supply_register)
before acquiring the regulators (regulator_get, inside
charger_manager_register_extcon), so userspace can reach externally_control
before the regulators are available.

Split charger_manager_register_extcon() on the sync/async boundary:
charger_manager_get_regulators() (regulator_get only, no async producer)
now runs before power_supply_register() so sysfs is not live before
regulators are available, and charger_manager_register_extcon() keeps only
the extcon notifier/work setup, still after power_supply_register() so a
power_supply_register() failure cannot reach extcon setup. This keeps the
sysfs setup/teardown ordering symmetric without introducing an asynchronous
producer on the earlier probe-error path.

Move power_supply_unregister() and try_charger_enable(cm, false) ahead of
the regulator_put() loop on both teardown paths, and adjust err_reg_extcon
(power_supply_unregister() then fall through err_regulator for
regulator_put(); get_regulators self-rolls back on its own failure).

This does not address the separate extcon-notifier-driven deref of the same
handles, which needs its own synchronization design.

Found by an in-house static analysis tool.
Advisories

No advisories yet.

Fixes

Solution

No solution given by the vendor.


Workaround

No workaround given by the vendor.

History

Sun, 13 Sep 2026 06:45:00 +0000

Type Values Removed Values Added
Metrics cvssV3_1

{'score': 5.2, 'vector': 'CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:H'}

cvssV3_1

{'score': 7.8, 'vector': 'CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H'}


Sat, 12 Sep 2026 00:15:00 +0000

Type Values Removed Values Added
Weaknesses CWE-364
References
Metrics threat_severity

None

cvssV3_1

{'score': 5.2, 'vector': 'CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:H'}

threat_severity

Moderate


Fri, 11 Sep 2026 23:45:00 +0000

Type Values Removed Values Added
Description In the Linux kernel, the following vulnerability has been resolved: power: supply: charger-manager: register regulators before exposing sysfs charger_manager_remove() and the err_reg_extcon probe error path free each charger regulator with regulator_put() before tearing down the power_supply sysfs entries (power_supply_unregister()). charger_manager_remove() also calls try_charger_enable(cm, false) after the regulator_put() loop. A concurrent write to a charger's externally_control sysfs attribute that lands between regulator_put() and power_supply_unregister() can run charger_externally_control_store() and call try_charger_enable(), which, when charging is enabled, dereferences the already-freed consumer handle. When charging is enabled, try_charger_enable(cm, false) in .remove() also dereferences the freed handles directly. Both leave use-after-free windows. Symmetrically, probe registers the sysfs entries (power_supply_register) before acquiring the regulators (regulator_get, inside charger_manager_register_extcon), so userspace can reach externally_control before the regulators are available. Split charger_manager_register_extcon() on the sync/async boundary: charger_manager_get_regulators() (regulator_get only, no async producer) now runs before power_supply_register() so sysfs is not live before regulators are available, and charger_manager_register_extcon() keeps only the extcon notifier/work setup, still after power_supply_register() so a power_supply_register() failure cannot reach extcon setup. This keeps the sysfs setup/teardown ordering symmetric without introducing an asynchronous producer on the earlier probe-error path. Move power_supply_unregister() and try_charger_enable(cm, false) ahead of the regulator_put() loop on both teardown paths, and adjust err_reg_extcon (power_supply_unregister() then fall through err_regulator for regulator_put(); get_regulators self-rolls back on its own failure). This does not address the separate extcon-notifier-driven deref of the same handles, which needs its own synchronization design. Found by an in-house static analysis tool.
Title power: supply: charger-manager: register regulators before exposing sysfs
First Time appeared Linux
Linux linux Kernel
CPEs cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Vendors & Products Linux
Linux linux Kernel
References

Projects

Sign in to view the affected projects.

cve-icon MITRE

Status: PUBLISHED

Assigner: Linux

Published:

Updated: 2026-09-13T06:29:42.907Z

Reserved: 2026-09-11T19:38:34.710Z

Link: CVE-2026-89472

cve-icon Vulnrichment

No data.

cve-icon NVD

Status : Received

Published: 2026-09-11T20:19:28.393

Modified: 2026-09-13T07:17:10.520

Link: CVE-2026-89472

cve-icon Redhat

Severity : Moderate

Publid Date: 2026-09-11T19:43:30Z

Links: CVE-2026-89472 - Bugzilla

cve-icon OpenCVE Enrichment

Updated: 2026-09-13T04:45:18Z

Weaknesses