In the Linux kernel, the following vulnerability has been resolved:
udf: Mark LVID buffer as uptodate before marking it dirty
When an I/O error occurs while writing the Logical Volume Integrity
Descriptor (LVID) buffer to the block device, the block layer's completion
handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the
buffer. However, the buffer still contains valid LVID data in memory. If
the filesystem is subsequently remounted read-write or synced,
`udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call
`mark_buffer_dirty()`. This triggers a spurious
`WARN_ON_ONCE(!buffer_uptodate(bh))` warning in `mark_buffer_dirty()`
because the buffer is not marked uptodate, even though its in-memory
contents are valid and are about to be overwritten.
To prevent this spurious warning, unconditionally set the `BH_Uptodate`
flag before calling `mark_buffer_dirty()` in `udf_open_lvid()` and
`udf_sync_fs()`. This acknowledges that the in-memory buffer is valid and
matches the workaround previously applied to `udf_close_lvid()` in commit
853a0c25baf9 ("udf: Mark LVID buffer as uptodate before marking it dirty").
Extending this workaround ensures consistent behavior across all LVID
updates.
Buffer I/O error on dev loop0, logical block 128, lost sync page write
------------[ cut here ]------------
!buffer_uptodate(bh)
WARNING: fs/buffer.c:1087 at mark_buffer_dirty+0x299/0x410 fs/buffer.c:1087
...
Call Trace:
<TASK>
udf_open_lvid+0x369/0x5b0 fs/udf/super.c:2078
udf_reconfigure+0x336/0x540 fs/udf/super.c:679
reconfigure_super+0x232/0x8f0 fs/super.c:1080
vfs_cmd_reconfigure fs/fsopen.c:268 [inline]
vfs_fsconfig_locked+0x171/0x320 fs/fsopen.c:297
__do_sys_fsconfig fs/fsopen.c:463 [inline]
__se_sys_fsconfig+0x6b9/0x810 fs/fsopen.c:350
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
</TASK>
udf: Mark LVID buffer as uptodate before marking it dirty
When an I/O error occurs while writing the Logical Volume Integrity
Descriptor (LVID) buffer to the block device, the block layer's completion
handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the
buffer. However, the buffer still contains valid LVID data in memory. If
the filesystem is subsequently remounted read-write or synced,
`udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call
`mark_buffer_dirty()`. This triggers a spurious
`WARN_ON_ONCE(!buffer_uptodate(bh))` warning in `mark_buffer_dirty()`
because the buffer is not marked uptodate, even though its in-memory
contents are valid and are about to be overwritten.
To prevent this spurious warning, unconditionally set the `BH_Uptodate`
flag before calling `mark_buffer_dirty()` in `udf_open_lvid()` and
`udf_sync_fs()`. This acknowledges that the in-memory buffer is valid and
matches the workaround previously applied to `udf_close_lvid()` in commit
853a0c25baf9 ("udf: Mark LVID buffer as uptodate before marking it dirty").
Extending this workaround ensures consistent behavior across all LVID
updates.
Buffer I/O error on dev loop0, logical block 128, lost sync page write
------------[ cut here ]------------
!buffer_uptodate(bh)
WARNING: fs/buffer.c:1087 at mark_buffer_dirty+0x299/0x410 fs/buffer.c:1087
...
Call Trace:
<TASK>
udf_open_lvid+0x369/0x5b0 fs/udf/super.c:2078
udf_reconfigure+0x336/0x540 fs/udf/super.c:679
reconfigure_super+0x232/0x8f0 fs/super.c:1080
vfs_cmd_reconfigure fs/fsopen.c:268 [inline]
vfs_fsconfig_locked+0x171/0x320 fs/fsopen.c:297
__do_sys_fsconfig fs/fsopen.c:463 [inline]
__se_sys_fsconfig+0x6b9/0x810 fs/fsopen.c:350
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
</TASK>
Metrics
Affected Vendors & Products
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Thu, 17 Sep 2026 16:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: udf: Mark LVID buffer as uptodate before marking it dirty When an I/O error occurs while writing the Logical Volume Integrity Descriptor (LVID) buffer to the block device, the block layer's completion handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the buffer. However, the buffer still contains valid LVID data in memory. If the filesystem is subsequently remounted read-write or synced, `udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call `mark_buffer_dirty()`. This triggers a spurious `WARN_ON_ONCE(!buffer_uptodate(bh))` warning in `mark_buffer_dirty()` because the buffer is not marked uptodate, even though its in-memory contents are valid and are about to be overwritten. To prevent this spurious warning, unconditionally set the `BH_Uptodate` flag before calling `mark_buffer_dirty()` in `udf_open_lvid()` and `udf_sync_fs()`. This acknowledges that the in-memory buffer is valid and matches the workaround previously applied to `udf_close_lvid()` in commit 853a0c25baf9 ("udf: Mark LVID buffer as uptodate before marking it dirty"). Extending this workaround ensures consistent behavior across all LVID updates. Buffer I/O error on dev loop0, logical block 128, lost sync page write ------------[ cut here ]------------ !buffer_uptodate(bh) WARNING: fs/buffer.c:1087 at mark_buffer_dirty+0x299/0x410 fs/buffer.c:1087 ... Call Trace: <TASK> udf_open_lvid+0x369/0x5b0 fs/udf/super.c:2078 udf_reconfigure+0x336/0x540 fs/udf/super.c:679 reconfigure_super+0x232/0x8f0 fs/super.c:1080 vfs_cmd_reconfigure fs/fsopen.c:268 [inline] vfs_fsconfig_locked+0x171/0x320 fs/fsopen.c:297 __do_sys_fsconfig fs/fsopen.c:463 [inline] __se_sys_fsconfig+0x6b9/0x810 fs/fsopen.c:350 do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 </TASK> | |
| Title | udf: Mark LVID buffer as uptodate before marking it dirty | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
|
Projects
Sign in to view the affected projects.
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-09-17T16:11:40.099Z
Reserved: 2026-09-17T16:02:15.088Z
Link: CVE-2026-93140
No data.
Status : Received
Published: 2026-09-17T17:18:08.973
Modified: 2026-09-17T17:18:08.973
Link: CVE-2026-93140
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.