In the Linux kernel, the following vulnerability has been resolved:
exit: hold a reference to thread_pid across proc_flush_pid
Commit 0a36bad01731 ("release_task: kill the no longer needed
get/put_pid(thread_pid)") removed the reference around proc_flush_pid().
It assumed that free_pids(post.pids) at the end of release_task() would
keep thread_pid alive until then.
That assumption is wrong. __change_pid() only records a detached PID in
post.pids when pid_has_task() is false for every PIDTYPE. If another task
still uses the exiting task's PID as its process group or session ID,
__unhash_process() removes the exiting task's PIDTYPE_PID link but leaves
the PID out of post.pids. release_task() therefore holds no reference to
it after dropping tasklist_lock.
The other task can then remove the remaining PIDTYPE links. Its
free_pids() call schedules delayed_put_pid(), and the RCU callback can free
the PID before the first release_task() reaches proc_flush_pid().
An unprivileged reproducer races wait4(-1) against setsid() to trigger this
ordering. Three of three fresh v7.2 KASAN boots reported:
BUG: KASAN: slab-use-after-free in
proc_invalidate_siblings_dcache+0x3e2/0x3f0
Read of size 8 by task h7_pid_reaper/1921
Call Trace:
proc_invalidate_siblings_dcache
release_task
wait_consider_task
__do_wait
do_wait
kernel_wait4
Freed by task 0:
kmem_cache_free
put_pid
delayed_put_pid
rcu_core
Last potentially related work creation:
__call_rcu_common
free_pids
ksys_setsid
KASAN identified a 144-byte object from the pid cache and located the bad
read 80 bytes into the freed object, matching pid->inodes. With an
explicit reference, three of three fresh boots completed without a KASAN
report. The concurrent RCU callback dropped its reference while
proc_flush_pid() was protected, and the balancing put_pid() performed the
final free afterward.
Take a reference before __unhash_process() clears p->thread_pid and release
it after proc_flush_pid() completes.
A tested source reproducer is available privately on request. No
controlled read or write, information leak, or privilege escalation is
claimed. The mainline patch applies directly to v6.19.y and newer;
v6.16.y through v6.18.y need a context-adjusted backport.
exit: hold a reference to thread_pid across proc_flush_pid
Commit 0a36bad01731 ("release_task: kill the no longer needed
get/put_pid(thread_pid)") removed the reference around proc_flush_pid().
It assumed that free_pids(post.pids) at the end of release_task() would
keep thread_pid alive until then.
That assumption is wrong. __change_pid() only records a detached PID in
post.pids when pid_has_task() is false for every PIDTYPE. If another task
still uses the exiting task's PID as its process group or session ID,
__unhash_process() removes the exiting task's PIDTYPE_PID link but leaves
the PID out of post.pids. release_task() therefore holds no reference to
it after dropping tasklist_lock.
The other task can then remove the remaining PIDTYPE links. Its
free_pids() call schedules delayed_put_pid(), and the RCU callback can free
the PID before the first release_task() reaches proc_flush_pid().
An unprivileged reproducer races wait4(-1) against setsid() to trigger this
ordering. Three of three fresh v7.2 KASAN boots reported:
BUG: KASAN: slab-use-after-free in
proc_invalidate_siblings_dcache+0x3e2/0x3f0
Read of size 8 by task h7_pid_reaper/1921
Call Trace:
proc_invalidate_siblings_dcache
release_task
wait_consider_task
__do_wait
do_wait
kernel_wait4
Freed by task 0:
kmem_cache_free
put_pid
delayed_put_pid
rcu_core
Last potentially related work creation:
__call_rcu_common
free_pids
ksys_setsid
KASAN identified a 144-byte object from the pid cache and located the bad
read 80 bytes into the freed object, matching pid->inodes. With an
explicit reference, three of three fresh boots completed without a KASAN
report. The concurrent RCU callback dropped its reference while
proc_flush_pid() was protected, and the balancing put_pid() performed the
final free afterward.
Take a reference before __unhash_process() clears p->thread_pid and release
it after proc_flush_pid() completes.
A tested source reproducer is available privately on request. No
controlled read or write, information leak, or privilege escalation is
claimed. The mainline patch applies directly to v6.19.y and newer;
v6.16.y through v6.18.y need a context-adjusted backport.
Metrics
Affected Vendors & Products
No data.
No data.
OpenCVE Enrichment is a feature of OpenCVE that uses AI to automatically link vendors and products to CVEs. Learn more on GitHub.
No data.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Fri, 25 Sep 2026 15:00:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Metrics |
cvssV3_1
|
Fri, 25 Sep 2026 14:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-362 CWE-416 |
Fri, 25 Sep 2026 10:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: exit: hold a reference to thread_pid across proc_flush_pid Commit 0a36bad01731 ("release_task: kill the no longer needed get/put_pid(thread_pid)") removed the reference around proc_flush_pid(). It assumed that free_pids(post.pids) at the end of release_task() would keep thread_pid alive until then. That assumption is wrong. __change_pid() only records a detached PID in post.pids when pid_has_task() is false for every PIDTYPE. If another task still uses the exiting task's PID as its process group or session ID, __unhash_process() removes the exiting task's PIDTYPE_PID link but leaves the PID out of post.pids. release_task() therefore holds no reference to it after dropping tasklist_lock. The other task can then remove the remaining PIDTYPE links. Its free_pids() call schedules delayed_put_pid(), and the RCU callback can free the PID before the first release_task() reaches proc_flush_pid(). An unprivileged reproducer races wait4(-1) against setsid() to trigger this ordering. Three of three fresh v7.2 KASAN boots reported: BUG: KASAN: slab-use-after-free in proc_invalidate_siblings_dcache+0x3e2/0x3f0 Read of size 8 by task h7_pid_reaper/1921 Call Trace: proc_invalidate_siblings_dcache release_task wait_consider_task __do_wait do_wait kernel_wait4 Freed by task 0: kmem_cache_free put_pid delayed_put_pid rcu_core Last potentially related work creation: __call_rcu_common free_pids ksys_setsid KASAN identified a 144-byte object from the pid cache and located the bad read 80 bytes into the freed object, matching pid->inodes. With an explicit reference, three of three fresh boots completed without a KASAN report. The concurrent RCU callback dropped its reference while proc_flush_pid() was protected, and the balancing put_pid() performed the final free afterward. Take a reference before __unhash_process() clears p->thread_pid and release it after proc_flush_pid() completes. A tested source reproducer is available privately on request. No controlled read or write, information leak, or privilege escalation is claimed. The mainline patch applies directly to v6.19.y and newer; v6.16.y through v6.18.y need a context-adjusted backport. | |
| Title | exit: hold a reference to thread_pid across proc_flush_pid | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-09-25T14:41:35.285Z
Reserved: 2026-09-25T10:18:58.200Z
Link: CVE-2026-97903
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-09-25T11:17:17.150
Modified: 2026-09-25T15:18:01.960
Link: CVE-2026-97903
Redhat
No data.
OpenCVE Enrichment
Updated: 2026-09-25T14:30:14Z