| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
| SSH Hostkey misconfiguration vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows attackers to obtain device credentials through a specially crafted man‑in‑the‑middle (MITM) attack. This could enable unauthorized access if captured credentials are reused.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| A flaw was found in Keylime. The Keylime registrar, since version 7.12.0, does not enforce client-side Transport Layer Security (TLS) authentication. This authentication bypass vulnerability allows unauthenticated clients with network access to perform administrative operations, including listing agents, retrieving public Trusted Platform Module (TPM) data, and deleting agents, by connecting without presenting a client certificate. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: RMI). Supported versions that are affected are Oracle Java SE: 8u471, 8u471-b50, 8u471-perf, 11.0.29, 17.0.17, 21.0.9, 25.0.1; Oracle GraalVM for JDK: 17.0.17 and 21.0.9; Oracle GraalVM Enterprise Edition: 21.3.16. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 4.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N). |
| curl's code for managing SSH connections when SFTP was done using the wolfSSH
powered backend was flawed and missed host verification mechanisms.
This prevents curl from detecting MITM attackers and more. |
| A vulnerability was found in Satellite. When running a remote execution job on a host, the host's SSH key is not being checked. When the key changes, the Satellite still connects it because it uses "-o StrictHostKeyChecking=no". This flaw can lead to a man-in-the-middle attack (MITM), denial of service, leaking of secrets the remote execution job contains, or other issues that may arise from the attacker's ability to forge an SSH key. This issue does not directly allow unauthorized remote execution on the Satellite, although it can leak secrets that may lead to it. |
| Backup uploads to ETM subject to man-in-the-middle interception |
| Improper host key checking in active check 'Check SFTP Service' and special agent 'VNX quotas and filesystem' in Checkmk before Checkmk 2.3.0p15, 2.2.0p33, 2.1.0p48 and 2.0.0 (EOL) allows man-in-the-middle attackers to intercept traffic |
| Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. In versions 1.16.1 and below, a critical security vulnerability exists in password handling mechanisms. During encrypted sandbox creation, user passwords are transmitted via shared memory, exposing them to potential interception. The vulnerability is particularly severe during password modification operations, where both old and new passwords are passed as plaintext command-line arguments to the Imbox process without any encryption or obfuscation. This implementation flaw allows any process within the user session, including unprivileged processes, to retrieve these sensitive credentials by reading the command-line arguments, thereby bypassing standard privilege requirements and creating a significant security risk. This is fixed in version 1.16.2. |
| A vulnerability in the SSH implementation of Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an unauthenticated, remote attacker to impersonate Cisco NDFC-managed devices.
This vulnerability is due to insufficient SSH host key validation. An attacker could exploit this vulnerability by performing a machine-in-the-middle attack on SSH connections to Cisco NDFC-managed devices, which could allow an attacker to intercept this traffic. A successful exploit could allow the attacker to impersonate a managed device and capture user credentials. |
| Matrix Javascript SDK is the Matrix Client-Server SDK for JavaScript. Prior to version 19.7.0, an attacker cooperating with a malicious homeserver can construct messages appearing to have come from another person. Such messages will be marked with a grey shield on some platforms, but this may be missing in others. This attack is possible due to the matrix-js-sdk implementing a too permissive key forwarding strategy on the receiving end. Starting with version 19.7.0, the default policy for accepting key forwards has been made more strict in the matrix-js-sdk. matrix-js-sdk will now only accept forwarded keys in response to previously issued requests and only from own, verified devices. The SDK now sets a `trusted` flag on the decrypted message upon decryption, based on whether the key used to decrypt the message was received from a trusted source. Clients need to ensure that messages decrypted with a key with `trusted = false` are decorated appropriately, for example, by showing a warning for such messages. This attack requires coordination between a malicious homeserver and an attacker, and those who trust your homeservers do not need a workaround. |
| Matrix Javascript SDK is the Matrix Client-Server SDK for JavaScript. Prior to version 19.7.0, an attacker cooperating with a malicious homeserver can construct messages that legitimately appear to have come from another person, without any indication such as a grey shield. Additionally, a sophisticated attacker cooperating with a malicious homeserver could employ this vulnerability to perform a targeted attack in order to send fake to-device messages appearing to originate from another user. This can allow, for example, to inject the key backup secret during a self-verification, to make a targeted device start using a malicious key backup spoofed by the homeserver. These attacks are possible due to a protocol confusion vulnerability that accepts to-device messages encrypted with Megolm instead of Olm. Starting with version 19.7.0, matrix-js-sdk has been modified to only accept Olm-encrypted to-device messages. Out of caution, several other checks have been audited or added. This attack requires coordination between a malicious home server and an attacker, so those who trust their home servers do not need a workaround. |
| matrix-android-sdk2 is the Matrix SDK for Android. Prior to version 1.5.1, an attacker cooperating with a malicious homeserver can construct messages appearing to have come from another person. Such messages will be marked with a grey shield on some platforms, but this may be missing in others. This attack is possible due to the key forwarding strategy implemented in the matrix-android-sdk2 that is too permissive. Starting with version 1.5.1, the default policy for accepting key forwards has been made more strict in the matrix-android-sdk2. The matrix-android-sdk2 will now only accept forwarded keys in response to previously issued requests and only from own, verified devices. The SDK now sets a `trusted` flag on the decrypted message upon decryption, based on whether the key used to decrypt the message was received from a trusted source. Clients need to ensure that messages decrypted with a key with `trusted = false` are decorated appropriately (for example, by showing a warning for such messages). As a workaroubnd, current users of the SDK can disable key forwarding in their forks using `CryptoService#enableKeyGossiping(enable: Boolean)`. |
| matrix-android-sdk2 is the Matrix SDK for Android. Prior to version 1.5.1, an attacker cooperating with a malicious homeserver can construct messages that legitimately appear to have come from another person, without any indication such as a grey shield. Additionally, a sophisticated attacker cooperating with a malicious homeserver could employ this vulnerability to perform a targeted attack in order to send fake to-device messages appearing to originate from another user. This can allow, for example, to inject the key backup secret during a self-verification, to make a targeted device start using a malicious key backup spoofed by the homeserver. matrix-android-sdk2 would then additionally sign such a key backup with its device key, spilling trust over to other devices trusting the matrix-android-sdk2 device. These attacks are possible due to a protocol confusion vulnerability that accepts to-device messages encrypted with Megolm instead of Olm. matrix-android-sdk2 version 1.5.1 has been modified to only accept Olm-encrypted to-device messages and to stop signing backups on a successful decryption. Out of caution, several other checks have been audited or added. This attack requires coordination between a malicious home server and an attacker, so those who trust their home servers do not need a workaround. |
| Matrix iOS SDK allows developers to build iOS apps compatible with Matrix. Prior to version 0.23.19, an attacker cooperating with a malicious homeserver can construct messages that legitimately appear to have come from another person, without any indication such as a grey shield. Additionally, a sophisticated attacker cooperating with a malicious homeserver could employ this vulnerability to perform a targeted attack in order to send fake to-device messages appearing to originate from another user. This can allow, for example, to inject the key backup secret during a self-verification, to make a targeted device start using a malicious key backup spoofed by the homeserver. These attacks are possible due to a protocol confusion vulnerability that accepts to-device messages encrypted with Megolm instead of Olm. matrix-ios-sdk version 0.23.19 has been modified to only accept Olm-encrypted to-device messages. Out of caution, several other checks have been audited or added. This attack requires coordination between a malicious home server and an attacker, so those who trust their home servers do not need a workaround. To avoid malicious backup attacks, one should not verify one's new logins using emoji/QR verifications methods until patched. |
| Matrix iOS SDK allows developers to build iOS apps compatible with Matrix. Prior to version 0.23.19, an attacker cooperating with a malicious homeserver can construct messages appearing to have come from another person. Such messages will be marked with a grey shield on some platforms, but this may be missing in others. This attack is possible due to the matrix-ios-sdk implementing a too permissive key forwarding strategy. The default policy for accepting key forwards has been made more strict in the matrix-ios-sdk version 0.23.19. matrix-ios-sdk will now only accept forwarded keys in response to previously issued requests and only from own, verified devices. The SDK now sets a `trusted` flag on the decrypted message upon decryption, based on whether the key used to decrypt the message was received from a trusted source. Clients need to ensure that messages decrypted with a key with `trusted = false` are decorated appropriately (for example, by showing a warning for such messages). This attack requires coordination between a malicious home server and an attacker, so those who trust their home servers do not need a workaround. |
| Matrix JavaScript SDK is the Matrix Client-Server software development kit (SDK) for JavaScript. Prior to version 19.7.0, an attacker cooperating with a malicious homeserver could interfere with the verification flow between two users, injecting its own cross-signing user identity in place of one of the users’ identities. This would lead to the other device trusting/verifying the user identity under the control of the homeserver instead of the intended one. The vulnerability is a bug in the matrix-js-sdk, caused by checking and signing user identities and devices in two separate steps, and inadequately fixing the keys to be signed between those steps. Even though the attack is partly made possible due to the design decision of treating cross-signing user identities as Matrix devices on the server side (with their device ID set to the public part of the user identity key), no other examined implementations were vulnerable. Starting with version 19.7.0, the matrix-js-sdk has been modified to double check that the key signed is the one that was verified instead of just referencing the key by ID. An additional check has been made to report an error when one of the device ID matches a cross-signing key. As this attack requires coordination between a malicious homeserver and an attacker, those who trust their homeservers do not need a particular workaround. |
| matrix-rust-sdk is an implementation of a Matrix client-server library in Rust, and matrix-sdk-crypto is the Matrix encryption library. Prior to version 0.6, when a user requests a room key from their devices, the software correctly remembers the request. When the user receives a forwarded room key, the software accepts it without checking who the room key came from. This allows homeservers to try to insert room keys of questionable validity, potentially mounting an impersonation attack. Version 0.6 fixes this issue. |
| matrix-nio is a Python Matrix client library, designed according to sans I/O principles. Prior to version 0.20, when a users requests a room key from their devices, the software correctly remember the request. Once they receive a forwarded room key, they accept it without checking who the room key came from. This allows homeservers to try to insert room keys of questionable validity, potentially mounting an impersonation attack. Version 0.20 fixes the issue. |
