Search Results (17066 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99562 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject FSCTL_SET_ZERO_DATA on a directory handle An authenticated client with a writable tree connection can open a directory with FILE_WRITE_DATA and send FSCTL_SET_ZERO_DATA on that handle. The handler only checks fp->daccess & FILE_WRITE_DATA_LE, but on a directory FILE_WRITE_DATA is the legitimate add-file right, so the check passes. ksmbd_vfs_zero_data() then calls kernel_write() on the directory file, which has no FMODE_WRITE, and __kernel_write_iter() hits WARN_ON_ONCE(!(file->f_mode & FMODE_WRITE)), panicking a panic_on_warn kernel. Before commit 25e414db7033 ("ksmbd: report holes in allocated range queries") the dense-file path used vfs_fallocate(), which rejects directories with -EISDIR. The kernel_write() loop that replaced it has no such check. Reject a directory handle in ksmbd_vfs_zero_data() before writing, as ksmbd_vfs_write() already does for SMB2_WRITE. WARNING: fs/read_write.c:608 at __kernel_write_iter+0x74b/0x8c0 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: kernel_write+0x1ef/0x4d0 ksmbd_vfs_zero_data+0x413/0x590 smb2_ioctl+0x21fa/0x66a0 handle_ksmbd_work+0x61b/0x1ff0
CVE-2026-99695 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after converting a block to a bucket ocfs2_xattr_create_index_block() turns a non-indexed xattr block into a tree by copying it into a bucket, and the copy sorts the entries: a block holds them in insertion order, a bucket by name hash. ocfs2_xattr_update_xattr_search() nevertheless relocates the caller's search by the index the entry had in the block, so unless the two orders agreed it points at an unrelated entry, and nothing between there and the write compares that entry's name with the one being set. Setting an xattr whose new value no longer fits the block arrives here with xs->not_found clear. The block gave up because ocfs2_xa_block_can_reuse() wants an exact namevalue size match, while ocfs2_xa_bucket_can_reuse() only wants an entry at least as large as the new one, so the bucket accepts a pair the block rejected and the update lands on whichever entry the sort left at that index. Equal padded name lengths get that other attribute's value replaced in place and its name left alone, so setxattr returns success while the attribute asked for keeps its old value. A longer one trips ocfs2_xa_reuse_entry()'s BUG_ON, and a shorter one is refused by the bucket as well, so ocfs2_xa_prepare_entry() wipes the entry and writes the new name over it, leaving xe_name_hash describing a name that is no longer there. Find the entry again by the name being set, matching the type as well. The copy carries every entry and every name over unchanged, and (type, name) pairs are unique within a block, so the match is exact. The type matters because the handlers strip their prefix before calling ocfs2_xattr_set(), so user.foo and trusted.foo share a stored name, a stored length and a hash, and both can sit in the same block. The name has to come from xi rather than from xs->here: a failed set can remove the entry xs->here names, and only the "growing" caller sets ctxt->set_abort, which is what stops the conversion. Scan every entry rather than narrowing on the hash the way ocfs2_find_xe_in_bucket() does, since an existing entry keeps the hash it was stored under, which a kernel that sign-extended the name bytes made different from the one computed now. An empty result means the entry did not survive the failed set and this has become an insert; leaving xs->here alone would keep it pointing into the block, which is rewritten as a tree root before the caller reads it again.
CVE-2026-130669 1 Imagemagick 1 Imagemagick 2026-11-20 3.3 Low
ImageMagick before 7.1.2-35 contains a null pointer dereference vulnerability that allows attackers to crash the process by using the -subimage option on a single-image list. Attackers can supply input producing an image list with only one image while -subimage is applied, causing a denial of service.
CVE-2026-131293 1 Splunk 1 Splunk 2026-11-20 8.3 High
In Splunk SOAR versions below 8.8.0, an authenticated user with permission to edit and run playbooks could read or overwrite persisted data for playbook runs outside the authorized label, or ownership scope for that user. The affected data can include playbook inputs, prompt and block results, outputs, and secrets that playbooks save in run data. Overwriting the data could corrupt results that paused, scheduled, or parent playbook runs later use. The vulnerability is possible because the playbook automation APIs do not bind data operations to the active playbook run.
CVE-2026-92809 1 Prestashop 2 Prestashop, Psgdpr 2026-11-20 4.3 Medium
PrestaShop psgdpr versions before 1.4.4 fail to validate that GDPR consent log entries are attributed to the authenticated customer. Authenticated attackers can submit arbitrary customer identifiers to create forged consent records for other customers, corrupting audit logs.
CVE-2026-76216 1 Vikunja 1 Vikunja 2026-11-20 7.5 High
Vikunja before 2.5.0 contains a principal-type confusion vulnerability where LinkSharing principals with id N are treated as user principals with users.id == N at three permission checks lacking type guards. Attackers with a link-share JWT can remove victims from teams, enumerate and delete victim bot users, or read team rosters by exploiting id collisions in the autoincrement space.
CVE-2026-74783 1 Scriban 1 Scriban 2026-11-20 7.5 High
Scriban versions 6.6.0 before 7.2.1 contain a non-enforcing ExpressionDepthLimit guard that fails to stop recursive descent parsing of deeply nested expressions. Attackers can supply templates with deeply nested parentheses, array initializers, object initializers, or unary operators to trigger an uncatchable StackOverflowException that immediately terminates the host process.
CVE-2026-73611 1 Filebrowser 1 Filebrowser 2026-11-20 6.8 Medium
File Browser versions 2.50.0 before 2.63.22 fail to validate JWT expiration when proxy authentication is configured with a non-default logout page. Attackers with a previously valid token can access protected routes and administrative endpoints indefinitely, and exchange expired tokens for fresh ones via the renewal endpoint.
CVE-2026-22186 1 Openmicroscopy 1 Bio-formats 2026-11-20 7.1 High
Bio-Formats versions before 8.5.0 contain an XML External Entity (XXE) vulnerability in the Leica Microsystems metadata parsing component (e.g., XLEF). The parser uses an insecurely configured DocumentBuilderFactory when processing Leica XML-based metadata files, allowing external entity expansion and external DTD loading. A crafted metadata file can trigger outbound network requests (SSRF), access local system resources where readable, or cause a denial of service during XML parsing.
CVE-2026-131204 1 Splunk 1 Enterprise Security 2026-11-20 4.2 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the mc_investigation_read capability could overwrite Mission Control preference records for other users and remove saved filters and analyst queue settings from those records. The vulnerability is possible because the Mission Control user preferences Representational State Transfer (REST) API does not bind an update to the preference record that passes the authorization check. The attack requires the user to obtain a preference record identifier that the product does not normally expose to that user. The user should not be able to exploit the vulnerability at will. For more information see Overview of Mission Control in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/mission-control/overview-of-mission-control-in-splunk-enterprise-security) in the Splunk documentation.
CVE-2026-99570 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to invalidate curseg if change_curseg() fails Our consistency stress test (fsstress + fio + atomic write workers + "f2fs_io shutdown 1") triggers below kernel BUG: F2FS-fs (vdd): Stopped filesystem due to reason: 0 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:3989! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI Workqueue: writeback wb_workfn (flush-253:48) RIP: 0010:f2fs_allocate_data_block+0x257a/0x38e0 Call Trace: <TASK> do_write_block+0x155/0xc10 f2fs_outplace_write_data+0x192/0x340 f2fs_do_write_data_page+0xc57/0x1880 f2fs_write_single_data_page+0xda9/0x15a0 f2fs_write_cache_pages+0x973/0x1f20 __f2fs_write_data_pages+0x6c4/0x1890 do_writepages+0x21e/0x560 __writeback_single_inode+0x119/0x11b0 writeback_sb_inodes+0x67d/0x17a0 wb_writeback+0x207/0x820 wb_workfn+0x128/0xc30 process_one_work+0x925/0x1600 worker_thread+0x60a/0xff0 kthread+0x35f/0x460 ret_from_fork+0x474/0x7e0 ret_from_fork_asm+0x1a/0x30 </TASK> The BUG is f2fs_bug_on(sbi, curseg->next_blkoff >= BLKS_PER_SEG(sbi)) in f2fs_allocate_data_block(), next_blkoff was 512. The root cause is a race in between atomic write commit and shutdown as below: Thread A (commit atomic write) Thread B (shutdown) Thread C (writeback) - f2fs_ioc_commit_atomic_write - f2fs_commit_atomic_write - __f2fs_commit_atomic_write - __replace_atomic_write_block - f2fs_replace_block - __f2fs_replace_block - f2fs_ioc_shutdown - f2fs_do_shutdown : F2FS_GOING_DOWN_METASYNC - f2fs_sync_fs - f2fs_write_single_data_page : pass f2fs_cp_error() check - f2fs_stop_checkpoint : set CP_ERROR_FLAG - change_curseg - reset_curseg : curseg->segno = new_segno : curseg->alloc_type = SSR : curseg->next_blkoff = __next_free_blkoff() which is BLKS_PER_SEG if there is no free slot in new_segno - f2fs_get_sum_cache : return -EIO due to f2fs_cp_error() : return error w/o restoring curseg : goto out_unlock, skip restoring old segno, blkoff and alloc_type - f2fs_do_write_data_page - f2fs_outplace_write_data - do_write_block - f2fs_allocate_data_block : curseg->segno is valid : f2fs_bug_on(next_blkoff >= BLKS_PER_SEG) Since commit 86f33603f8c5 ("f2fs: handle errors of f2fs_get_meta_page_nofail"), change_curseg() can fail after the curseg has already been switched to the new segment, then the curseg is left in an inconsistent state: it points to a segment which may have no free slot, its summary block is zeroed, and the caller can not restore it. Subsequent block allocation on the curseg will trigger the BUG. Moreover, the writeback thread dies with curseg_lock, curseg_mutex and sentry_lock held, so the commit, shutdown and other I/O threads hang in D state. Since change_curseg() only fails once CP_ERROR_FLAG is set, no checkpoint will be committed afterward, let's invalidate the curseg via reset_curseg_fields() on failure, as new_curseg() does for -ENOSPC, then f2fs_allocate_data_block() will fail with -ENOSPC on the curseg instead of triggering BUG, and do_write_block() can handle the error since CP_ERROR_FLA ---truncated---
CVE-2026-131279 1 Splunk 1 Splunk 2026-11-20 4.3 Medium
In Splunk SOAR versions below 8.8.0, an authenticated user with permission to edit artifacts could cause indicator correlation data to retain stale field associations, which can produce incorrect correlation results and event counts. The vulnerability is possible because Splunk SOAR does not remove stale indicator associations when an artifact changes.
CVE-2026-131286 1 Splunk 1 Splunk 2026-11-20 7.1 High
In Splunk SOAR versions below 8.8.0, an authenticated user with permission to author and run playbooks could view action data outside the authorized scope for that user and change the status and message of another playbook run. The vulnerability is possible because the playbook API does not verify that the requested playbook run is within the authorized scope of the authenticated user.
CVE-2026-131291 1 Splunk 1 Splunk 2026-11-20 6.5 Medium
In Splunk SOAR versions below 8.8.0, a Splunk SOAR user who can edit and run playbooks for a permitted container label could associate action and callback state with a running playbook outside that container label. This could affect playbook automation for containers that the user cannot view. The vulnerability is possible because the Playbook Automation API accepts a supplied playbook run identifier without verifying that it is bound to the server-provided playbook execution context. The vulnerability requires a running playbook on a container label that the user cannot view.
CVE-2026-131294 1 Splunk 1 Splunk 2026-11-20 6.5 Medium
In Splunk SOAR versions below 8.8.0, an authenticated user who can edit and run playbooks on a container label could associate a custom-function callback with another playbook run. The callback could modify the state of a container outside the authorized scope for that user. The vulnerability is possible because Splunk SOAR does not bind playbook API requests to the trusted playbook run and container context.
CVE-2026-131299 1 Splunk 1 Splunk App For Stream 2026-11-20 7.5 High
In Splunk App for Stream versions below 8.1.7, an unauthenticated user who can reach the Splunk App for Stream Representational State Transfer (REST) API on the management port (8089) could upload an Extensible Markup Language (XML) vocabulary file, which lets the vocabulary upload endpoint read local files accessible to the Splunk process or send outbound requests. The vulnerability is possible because the vocabulary upload endpoint parses uploaded XML without an application-level policy that blocks external entity resolution. For more information see About Splunk Stream (https://help.splunk.com/en/splunk-enterprise/collect-stream-data/install-and-configure-splunk-stream/8.1/introduction/about-splunk-stream) and restmap.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/9.4/configuration-file-reference/9.4.3-configuration-file-reference/restmap.conf) in the Splunk documentation.
CVE-2026-99696 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.1 Medium
In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after defragmenting a bucket ocfs2_xattr_set_entry_bucket() hands loc.xl_entry to ocfs2_xa_set() twice: once for the bucket as it stands, and, if that reports -ENOSPC, once more after ocfs2_defrag_xattr_bucket() has packed the name/value pairs down. Defragmenting ends by sorting the entry array on xe_name_hash. Buckets are kept sorted, so the sort only permutes entries that share a hash, but lib/sort.c is an unstable heapsort and it does permute them. loc.xl_entry is an address inside xh_entries[], so afterwards it denotes whichever entry landed in that slot rather than the one the search found. The second ocfs2_xa_set() then works on the wrong entry. Nothing on that path compares the entry's name with xi->xi_name, so what happens depends on how the two entries compare in size: ocfs2_xa_reuse_entry() trips its BUG_ON() when the padded name sizes differ, and otherwise the new value is written into the neighbouring attribute's value slot while the attribute being set is left untouched. setxattr() reports success either way. Remember the entry's hash before defragmenting and look the entry up again afterwards, the way ocfs2_xattr_bucket_find() does. An entry that cannot be found again means the bucket no longer holds what the search found, so fail with -EFSCORRUPTED rather than writing through the stale pointer.
CVE-2026-131244 1 Splunk 1 Splunk 2026-11-20 4.3 Medium
In Splunk SOAR versions below 8.8.0, an authenticated user with permission to edit and run playbooks could modify a child playbook callback handle associated with another playbook run, which could alter the callback behavior of that run. The vulnerability exists because the Playbook API does not verify that callback-handle updates belong to the related parent and child playbook runs.
CVE-2026-131249 1 Splunk 1 Splunk 2026-11-20 4.3 Medium
In Splunk SOAR versions below 8.8.0, an authenticated user with permission to view, edit, and run playbooks and access to at least one container label could retrieve a callback handle from a playbook run outside the container-label scope granted to that account. The vulnerability is possible because Splunk SOAR does not verify that the requested callback handle belongs to the parent playbook run that launched the child playbook. For more information see Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.8.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) and Data access automation API (https://help.splunk.com/en/splunk-soar/soar-on-premises/python-playbook-api-reference/8.8.0/automation-api/data-access-automation-api) in the Splunk documentation.
CVE-2026-131254 1 Splunk 1 Splunk 2026-11-20 5.4 Medium
In Splunk SOAR versions below 8.8.0, a user with permission to create containers on one label could use the Representational State Transfer (REST) API to create a container with a parent relationship to a container that the user cannot access. This could let the user alter incident lineage across authorization boundaries and identify existing restricted containers. The vulnerability is possible because the REST API accepts a customer-supplied parent relationship when creating a container without authorizing access to the referenced container. For more information see REST Containers (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/8.6.0/container-endpoints/rest-containers) and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.8.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation.