| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect access control in M2Soft CROWNIX Report & ERS affected v7.x to v7.4.3.599 and v8.x to v8.0.3.79 allows unauthorized attackers to obtain Administrator account access. |
| A weakness has been identified in joey-zhou xiaozhi-esp32-server-java up to 3.0.0. This impacts the function tryAuthenticateWithCookies of the file AuthenticationInterceptor.java of the component Cookie Handler. Executing manipulation can lead to improper authentication. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. Upgrading to version 4.0.0 will fix this issue. It is recommended to upgrade the affected component. |
| A vulnerability was identified in h-moses moga-mall up to 392d631a5ef15962a9bddeeb9f1269b9085473fa. This vulnerability affects the function addProduct of the file src/main/java/com/ms/product/controller/PmsProductController.java. Such manipulation of the argument objectName leads to unrestricted upload. The attack may be performed from remote. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. |
| A vulnerability in the implementation of the TACACS+ protocol in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to view sensitive data or bypass authentication.
This vulnerability exists because the system does not properly check whether the required TACACS+ shared secret is configured. A machine-in-the-middle attacker could exploit this vulnerability by intercepting and reading unencrypted TACACS+ messages or impersonating the TACACS+ server and falsely accepting arbitrary authentication requests. A successful exploit could allow the attacker to view sensitive information in a TACACS+ message or bypass authentication and gain access to the affected device. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| A vulnerability in the access control list (ACL) processing of IPv4 packets of Cisco SD-WAN vEdge Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to the improper enforcement of the implicit deny all at the end of a configured ACL. An attacker could exploit this vulnerability by attempting to send unauthorized traffic to an interface on an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. |
| kubewarden-controller is a Kubernetes controller that allows you to dynamically register Kubewarden admission policies. By design, AdmissionPolicy and AdmissionPolicyGroup can evaluate only namespaced resources. The resources to be evaluated are determined by the rules provided by the user when defining the policy. There might be Kubernetes namespaced resources that should not be validated by AdmissionPolicy and by the AdmissionPolicyGroup policies because of their sensitive nature. For example, PolicyReport are namespaced resources that contain the list of non compliant objects found inside of a namespace. An attacker can use either an AdmissionPolicy or an AdmissionPolicyGroup to prevent the creation and update of PolicyReport objects to hide non-compliant resources. Moreover, the same attacker might use a mutating AdmissionPolicy to alter the contents of the PolicyReport created inside of the namespace. Starting from the 1.21.0 release, the validation rules applied to AdmissionPolicy and AdmissionPolicyGroup have been tightened to prevent them from validating sensitive types of namespaced resources. |
| kubewarden-controller is a Kubernetes controller that allows you to dynamically register Kubewarden admission policies. The policy group feature, added to by the 1.17.0 release. By being namespaced, the AdmissionPolicyGroup has a well constrained impact on cluster resources. Hence, it’s considered safe to allow non-admin users to create and manage these resources in the namespaces they own. Kubewarden policies can be allowed to query the Kubernetes API at evaluation time; these types of policies are called “context aware“. Context aware policies can perform list and get operations against a Kubernetes cluster. The queries are done using the ServiceAccount of the Policy Server instance that hosts the policy. That means that access to the cluster is determined by the RBAC rules that apply to that ServiceAccount. The AdmissionPolicyGroup CRD allowed the deployment of context aware policies. This could allow an attacker to obtain information about resources that are out of their reach, by leveraging a higher access to the cluster granted to the ServiceAccount token used to run the policy. The impact of this vulnerability depends on the privileges that have been granted to the ServiceAccount used to run the Policy Server and assumes that users are using the recommended best practices of keeping the Policy Server's ServiceAccount least privileged. By default, the Kubewarden helm chart grants access to the following resources (cluster wide) only: Namespace, Pod, Deployment and Ingress. This vulnerability is fixed in 1.21.0. |
| MinIO is a high performance object storage. Starting in RELEASE.2024-06-06T09-36-42Z and prior to
RELEASE.2025-02-28T09-55-16Z, a bug in evaluating the trust of the SSH key used in an SFTP connection to MinIO allows authentication bypass and unauthorized data access. On a MinIO server with SFTP access configured and using LDAP as an external identity provider, MinIO supports SSH key based authentication for SFTP connections when the user has the `sshPublicKey` attribute set in their LDAP server. The server trusts the client's key only when the public key is the same as the `sshPublicKey` attribute. Due to the bug, when the user has no `sshPublicKey` property in LDAP, the server ends up trusting the key allowing the client to perform any FTP operations allowed by the MinIO access policies associated with the LDAP user (or any of their groups). Three requirements must be met in order to exploit the vulnerability. First, the MinIO server must be configured to allow SFTP access and use LDAP as an external identity provider. Second, the attacker must have knowledge of an LDAP username that does not have the `sshPublicKey` property set. Third, such an LDAP username or one of their groups must also have some MinIO access policy configured. When this bug is successfully exploited, the attacker can perform any FTP operations (i.e. reading, writing, deleting and listing objects) allowed by the access policy associated with the LDAP user account (and their groups). Version 1.2.0 fixes the issue. |
| conda-forge infrastructure holds common configurations and settings for key pieces of the conda-forge infrastructure.
Between 2025-02-10 and 2025-04-01, conda-forge infrastructure used the wrong token for Azure's cf-staging access. This bug meant that any feedstock maintainer could upload a package to the conda-forge channel, bypassing our feedstock-token + upload process. The security logs on anaconda.org were check for any packages that were not copied from the cf-staging to the conda-forge channel and none were found. |
| Texas Instruments CC2652RB LaunchPad SimpleLink CC13XX CC26XX SDK 7.41.00.17 was discovered to utilize insufficient permission checks on critical fields within Bluetooth Low Energy (BLE) data packets. This issue allows attackers to cause a Denial of Service (DoS) via a crafted LL_Length_Req packet. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Himmelblau versions 0.9.0 through 0.9.14 and 1.00-alpha are vulnerable to a privilege escalation issue when Entra ID group-based access restrictions are configured using group display names instead of object IDs. Starting in version 0.9.0, Himmelblau introduced support for specifying group names in the `pam_allow_groups` configuration option. However, Microsoft Entra ID permits the creation of multiple groups with the same `displayName` via the Microsoft Graph API—even by non-admin users, depending on tenant settings. As a result, a user could create a personal group with the same name as a legitimate access group (e.g., `"Allow-Linux-Login"`), add themselves to it, and be granted authentication or `sudo` rights by Himmelblau. Because affected Himmelblau versions compare group names by either `displayName` or by the immutable `objectId`, this allows bypassing access control mechanisms intended to restrict login to members of official, centrally-managed groups. This issue is fixed in Himmelblau version **0.9.15** and later. In these versions, group name matching in `pam_allow_groups` has been deprecated and removed, and only group `objectId`s (GUIDs) may be specified for secure group-based filtering. To mitigate the issue without upgrading, replace all entries in `pam_allow_groups` with the objectId of the target Entra ID group(s) and/or audit your tenant for groups with duplicate display names using the Microsoft Graph API. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. A vulnerability present in versions 0.9.10 through 0.9.16 allows a user to authenticate to a Linux host via Himmelblau using an *invalid* Linux Hello PIN, provided the host is offline. While the user gains access to the local system, Single Sign-On (SSO) fails due to the network being down and the inability to issue tokens (due to a failure to unlock the Hello key). The core issue lies in an incorrect assumption within the `acquire_token_by_hello_for_business_key` function: it was expected to return a `TPMFail` error for an invalid Hello key when offline, but instead, a preceding nonce request resulted in a `RequestFailed` error, leading the system to erroneously transition to an offline success state without validating the Hello key unlock. This impacts systems using Himmelblau for authentication when operating in an offline state with Hello PIN authentication enabled. Rocky Linux 8 (and variants) are not affected by this vulnerability. The problem is resolved in Himmelblau version 0.9.17. A workaround is available for users who cannot immediately upgrade. Disabling Hello PIN authentication by setting `enable_hello = false` in `/etc/himmelblau/himmelblau.conf` will mitigate the vulnerability. |
| The Lotus Cars Android app (com.lotus.carsdomestic.intl) 1.2.8 contains an exported component, PushDeepLinkActivity, which is accessible without authentication via ADB or malicious apps. This poses a risk of unintended access to application internals and can cause denial of service or logic abuse. |
| Incorrect access control in CaricaVerbale in Agenzia Impresa Eccobook v2.81.1 allows authenticated attackers with low-level access to escalate privileges to Administrator. |
| TM2 Monitoring v3.04 contains an authentication bypass and plaintext credential disclosure. |
| CWE-284: Improper Access Control |
| Various software builds for the following TCL 30Z and TCL A3X devices leak the ICCID to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys) and TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys). This malicious app reads from the "persist.sys.tctPowerIccid" system property to indirectly obtain the ICCID. |
| An Improper Handling of Insufficient Permissions or Privileges vulnerability in scripts used in B&R APROL <4.4-00P5 may allow an authenticated local attacker to read credential information. |
| A vulnerability classified as problematic has been found in 70mai 1S up to 20250611. This affects an unknown part of the component Video Services. The manipulation leads to improper authentication. Access to the local network is required for this attack to succeed. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
