| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Write what were condition within AMD CPUs may allow an admin-privileged attacker to modify the configuration of the CPU pipeline potentially resulting in the corruption of the stack pointer inside an SEV-SNP guest. |
| A vulnerability was determined in raysan5 raylib up to 909f040. Affected by this vulnerability is the function GenImageFontAtlas of the file src/rtext.c. Executing a manipulation can lead to heap-based buffer overflow. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. This patch is called 5a3391fdce046bc5473e52afbd835dd2dc127146. Applying a patch is advised to resolve this issue. |
| A security vulnerability has been detected in cijliu librtsp up to 2ec1a81ad65280568a0c7c16420d7c10fde13b04. The affected element is the function rtsp_rely_dumps. The manipulation leads to buffer overflow. An attack has to be approached locally. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in cijliu librtsp up to 2ec1a81ad65280568a0c7c16420d7c10fde13b04. The impacted element is the function rtsp_parse_request. The manipulation results in buffer overflow. Attacking locally is a requirement. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in cijliu librtsp up to 2ec1a81ad65280568a0c7c16420d7c10fde13b04. This affects the function rtsp_parse_method. This manipulation causes buffer overflow. It is possible to launch the attack on the local host. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A denial-of-service security issue in the affected product. The security issue occurs when a malformed CIP forward open message is sent. This could result in a major nonrecoverable fault a restart is required to recover. |
| ArduinoCore-avr contains the source code and configuration files of the Arduino AVR Boards platform. A vulnerability in versions prior to 1.8.7 allows an attacker to trigger a stack-based buffer overflow when converting floating-point values to strings with high precision. By passing very large `decimalPlaces` values to the affected String constructors or concat methods, the `dtostrf` function writes beyond fixed-size stack buffers, causing memory corruption and denial of service. Under specific conditions, this could enable arbitrary code execution on AVR-based Arduino boards.
### Patches
- The Fix is included starting from the `1.8.7` release available from the following link [ArduinoCore-avr v1.8.7](https://github.com/arduino/ArduinoCore-avr)
- The Fixing Commit is available at the following link [1a6a417f89c8901dad646efce74ae9d3ddebfd59](https://github.com/arduino/ArduinoCore-avr/pull/613/commits/1a6a417f89c8901dad646efce74ae9d3ddebfd59)
### References
- [ASEC-26-001 ArduinoCore-avr vXXXX Resolves Buffer Overflow Vulnerability](https://support.arduino.cc/hc/en-us/articles/XXXXX)
### Credits
- Maxime Rossi Bellom and Ramtine Tofighi Shirazi from SecMate (https://secmate.dev/) |
| hustoj is an open source online judge based on PHP/C++/MySQL/Linux for ACM/ICPC and NOIP training. All versions are vulnerable to CSV Injection (Formula Injection) through the contest rank export functionality (contestrank.xls.php and admin/ranklist_export.php). The application fails to sanitize user-supplied input (specifically the "Nickname" field) before exporting it to an .xls file (which renders as an HTML table but is opened by Excel). If a malicious user sets their nickname to an Excel formula when an administrator exports and opens the rank list in Microsoft Excel, the formula will be executed. This can lead to arbitrary command execution (RCE) on the administrator's machine or data exfiltration. A fix was not available at the time of publication. |
| DD-WRT version 45723 contains a buffer overflow vulnerability in the UPNP network discovery service that allows remote attackers to potentially execute arbitrary code. Attackers can send crafted M-SEARCH packets with oversized UUID payloads to trigger buffer overflow conditions on the target device. |
| uev (aka libuev) before 2.4.1 has a buffer overflow in epoll_wait if maxevents is a large number. |
| vCenter Server contains a heap-overflow vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may trigger this vulnerability by sending a specially crafted network packet potentially leading to remote code execution. |
| A vulnerability was found in HDF5 up to 1.14.6. It has been declared as problematic. Affected by this vulnerability is the function H5O_msg_flush of the file src/H5Omessage.c. The manipulation of the argument oh leads to heap-based buffer overflow. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. |
| A vulnerability, which was classified as critical, has been found in HDF5 up to 1.14.6. Affected by this issue is the function H5FS__sect_find_node of the file H5FSsection.c. The manipulation leads to heap-based buffer overflow. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. |
| In jose4j before 0.9.6, an attacker can cause a Denial-of-Service (DoS) condition by crafting a malicious JSON Web Encryption (JWE) token with an exceptionally high compression ratio. When this token is processed by the server, it results in significant memory allocation and processing time during decompression. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()
Patch series "nilfs2: fix UBSAN shift-out-of-bounds warnings on mount
time".
The first patch fixes a bug reported by syzbot, and the second one fixes
the remaining bug of the same kind. Although they are triggered by the
same super block data anomaly, I divided it into the above two because the
details of the issues and how to fix it are different.
Both are required to eliminate the shift-out-of-bounds issues at mount
time.
This patch (of 2):
If the block size exponent information written in an on-disk superblock is
corrupted, nilfs_sb2_bad_offset helper function can trigger
shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn
is set):
shift exponent 38983 is too large for 64-bit type 'unsigned long long'
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_shift_out_of_bounds+0x33d/0x3b0 lib/ubsan.c:322
nilfs_sb2_bad_offset fs/nilfs2/the_nilfs.c:449 [inline]
nilfs_load_super_block+0xdf5/0xe00 fs/nilfs2/the_nilfs.c:523
init_nilfs+0xb7/0x7d0 fs/nilfs2/the_nilfs.c:577
nilfs_fill_super+0xb1/0x5d0 fs/nilfs2/super.c:1047
nilfs_mount+0x613/0x9b0 fs/nilfs2/super.c:1317
...
In addition, since nilfs_sb2_bad_offset() performs multiplication without
considering the upper bound, the computation may overflow if the disk
layout parameters are not normal.
This fixes these issues by inserting preliminary sanity checks for those
parameters and by converting the comparison from one involving
multiplication and left bit-shifting to one using division and right
bit-shifting. |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the Web-Filtering module of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
If an SRX device configured for UTM Web-Filtering receives a specifically malformed SSL packet, this will cause an FPC crash and restart.
This issue affects Junos OS on SRX Series:
* 23.2 versions from 23.2R2-S2 before 23.2R2-S5,
* 23.4 versions from 23.4R2-S1 before 23.4R2-S5,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R1-S3, 24.4R2.
Earlier versions of Junos are also affected, but no fix is available. |
| A Stack-based Buffer Overflow vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS allows a network-based attacker, authenticated with low privileges to cause a Denial-of-Service (DoS).
Subscribing to telemetry sensors at scale causes all FPC connections to drop, resulting in an FPC crash and restart.
The issue was not seen when YANG packages for the specific sensors were installed.
This issue affects Junos OS:
* all versions before 22.4R3-S7,
* 23.2 version before 23.2R2-S4,
* 23.4 versions before 23.4R2. |
| A Buffer Over-read vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When an affected device receives a BGP update with a set of specific optional transitive attributes over an established peering session, rpd will crash and restart when attempting to advertise the received information to another peer.
This issue can only happen if one or both of the BGP peers of the receiving session are non-4-byte-AS capable as determined from the advertised capabilities during BGP session establishment. Junos OS and Junos OS Evolved default behavior is 4-byte-AS capable unless this has been specifically disabled by configuring:
[ protocols bgp ... disable-4byte-as ]
Established BGP sessions can be checked by executing:
show bgp neighbor <IP address> | match "4 byte AS"
This issue affects:
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* 23.2 versions before 23.2R2-S5-EVO,
* 23.4 versions before 23.4R2-S6-EVO,
* 24.2 versions before 24.2R2-S2-EVO,
* 24.4 versions before 24.4R2-EVO. |
| An Improper Validation of Consistency within Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker sending a specifically malformed BGP packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
In some cases, rpd fails to restart requiring a manual restart via the 'restart routing' CLI command.
This issue only affects systems with BGP traceoptions enabled and
requires a BGP session to be already established. Systems without BGP traceoptions enabled are not affected by this issue.
This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability.
This issue affects:
Junos OS:
* All versions before 21.4R3-S8,
* 22.2 before 22.2R3-S5,
* 22.3 before 22.3R3-S4,
* 22.4 before 22.4R3-S3,
* 23.2 before 23.2R2-S2,
* 23.4 before 23.4R2;
Junos OS Evolved:
* All versions before 21.4R3-S8-EVO,
* 22.2-EVO before 22.2R3-S5-EVO,
* 22.3-EVO before 22.3R3-S4-EVO,
* 22.4-EVO before 22.4R3-S3-EVO,
* 23.2-EVO before 23.2R2-S2-EVO,
* 23.4-EVO before 23.4R2-EVO. |
| A Buffer Copy without Checking Size of Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Juniper Networks Junos OS Evolved allows an unauthenticated, adjacent attacker to send specific RPKI-RTR packets resulting in a crash, creating a Denial of Service (DoS) condition. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
This issue affects
Junos OS:
* All versions before 21.2R3-S8,
* from 21.4 before 21.4R3-S8,
* from 22.2 before 22.2R3-S4,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3-S2,
* from 23.2 before 23.2R2-S1,
* from 23.4 before 23.4R2.
Junos OS Evolved: * All versions before 21.2R3-S8-EVO,
* from 21.4 before 21.4R3-S8-EVO,
* from 22.2 before 22.2R3-S4-EVO,
* from 22.3 before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-S2-EVO,
* from 23.2 before 23.2R2-S1-EVO,
* from 23.4 before 23.4R2-EVO. |
