| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 22.0.1, 21.2.17, and 20.3.25, a Denial of Service (DoS) vulnerability exists in the @angular/common package of the Angular framework. The formatDate function, which is also utilized by the standard Angular DatePipe, does not properly limit or validate the length of the format parameter. When parsing a maliciously crafted, excessively long date format string (e.g., a repeating pattern or very large string), the internal parser splits the string iteratively using a regular expression loop. This results in uncontrolled resource consumption (high CPU utilization and excessive memory allocations), leading to a Denial of Service (DoS). This vulnerability is fixed in 22.0.1, 21.2.17, and 20.3.25. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 22.0.0-rc.2, 21.2.15, 20.3.22, and 19.2.23, a Denial of Service (DoS) vulnerability exists in the @angular/common package of Angular. The formatNumber function, which is also utilized by DecimalPipe, PercentPipe, and CurrencyPipe, does not properly validate the upper bounds of the digitsInfo parameter. Specifically, the minimum and maximum fraction digits parsed from the digitsInfo string (e.g., 1.2-4) are converted to integers and used without limits. When parsing a maliciously crafted digitsInfo string with excessively large fraction digit values (e.g., 1.200000000-200000000), the internal roundNumber function attempts to pad the digits array to match the requested fraction size. This results in an unbounded loop that repeatedly pushes elements into an array. This vulnerability is fixed in 22.0.0-rc.2, 21.2.15, 20.3.22, and 19.2.23. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.12.2, an attacker who uses this vulnerability can craft a PDF which leads to large memory usage. This requires extracting the text of a page which contains a form XObject with self-references. This vulnerability is fixed in 6.12.2. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.12.2, an attacker who uses this vulnerability can craft a PDF which leads to long runtimes. This requires accessing a stream which uses the /FlateDecode filter with a PNG predictor. This vulnerability is fixed in 6.12.2. |
| Python-Multipart is a streaming multipart parser for Python. Prior to 0.0.30, when parsing application/x-www-form-urlencoded bodies, QuerystringParser located the field separator with a two step lookup: it first scanned the entire remaining buffer for &, and only when no & existed anywhere ahead did it fall back to scanning for ;. For a body that uses ; as the separator and contains no &, every field iteration performed a full failed & scan over the entire remaining buffer before locating the nearby ;. With N semicolon separated fields in a chunk of size B, this yields O(B^2) byte comparisons per chunk. An attacker can submit a small crafted body of the form a;a;a;... and cause the parser to spend seconds of CPU per request. A handful of concurrent requests can exhaust worker processes. This vulnerability is fixed in 0.0.30. |
| Inefficient algorithmic complexity in Plug's nested-parameter decoder allows an unauthenticated remote attacker to cause denial of service. Plug.Conn.Query.decode/4 (and Plug.Conn.Query.decode_each/2) parse query strings and application/x-www-form-urlencoded request bodies. When a key contains many bracketed segments such as a[a][a][a]=1, the decoder walks the brackets and, for each of the N levels, performs a map operation keyed on an ever-growing binary prefix of the key, hashing the full byte range at each step. The total decode cost is therefore quadratic in the number of nesting levels.
With the default Plug.Parsers.URLENCODED body limit of 1,000,000 bytes, a single request can carry roughly 333,000 nesting levels and saturate a BEAM scheduler for minutes. A small number of concurrent requests can saturate all schedulers and render a Plug-based server unresponsive. No authentication or knowledge of application routes is required.
This vulnerability is associated with program files lib/plug/conn/query.ex and program routines Plug.Conn.Query.decode/4, Plug.Conn.Query.decode_each/2, Plug.Conn.Query.split_keys/6, Plug.Conn.Query.insert_keys/3, and Plug.Conn.Query.finalize_pointer/2.
This issue affects plug from 1.15.0 before 1.15.5, 1.16.4, 1.17.2, 1.18.3, and 1.19.3. |
| Python-Multipart is a streaming multipart parser for Python. Prior to 0.0.31, parse_form() did not validate the Content-Length header before using it to bound its chunked read of the request body. A negative Content-Length turned the bounded read into a read-until-EOF, so the entire body was loaded into memory in a single read instead of in fixed-size chunks. This vulnerability is fixed in 0.0.31. |
| There is a memory leak in NI grpc-device BeginSidebandStream that may result in denial of service due to memory exhaustion. This affects NI grpc-device 2.17.0 and prior versions. |
| IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. |
| js-toml is a TOML parser for JavaScript, fully compliant with the TOML 1.0.0 Spec. Versions up to and including 1.1.0 parse hexadecimal / octal / binary integer literals via a hand-written `parseBigInt` loop that multiplies a `BigInt` accumulator by the radix once per input digit. Each iteration performs a `BigInt * BigInt` operation on an accumulator that grows linearly with the number of digits already consumed, so the whole loop is O(n²) in the literal length. The lexer regex places no upper bound on the literal length, so a single TOML document containing one ~500 kB hex literal pins one CPU core for ~40 seconds on a modern laptop (Apple M-series, Node v22). Memory amplification is bounded but CPU amplification is severe and grows quadratically: doubling the literal length quadruples the work. A caller that invokes `load()` on attacker-controlled TOML (configuration upload endpoints, CI/CD systems ingesting third-party `*.toml`, IDE plugins, build tools) is exposed to a single-request CPU exhaustion DoS. Version 1.1.1 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix resource leaks on device setup failure
Make sure to call controller cleanup() if spi_setup() fails while
registering a device to avoid leaking any resources allocated by
setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unplug frees the instance of struct fb_info. Accessing the memory will
operate on undefined state. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Free the node during ctrl_cmd_bye()
A node sends the BYE packet when it is about to go down. So the nameserver
should advertise the removal of the node to all remote and local observers
and free the node finally. But currently, the nameserver doesn't free the
node memory even after processing the BYE packet. This causes the node
memory to leak.
Hence, remove the node from Xarray list and free the node memory during
both success and failure case of ctrl_cmd_bye(). |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix a resource leak in xfs_alloc_buftarg()
In the error path, call fs_put_dax() to drop the DAX
device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix active_num_conn leak on transport allocation failure
Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in
ksmbd_tcp_new_connection()") addressed the kthread_run() failure
path. The earlier alloc_transport() == NULL path in the same
function has the same leak, is reachable pre-authentication via any
TCP connect to port 445, and was empirically reproduced on UML
(ARCH=um, v7.0-rc7): a small number of forced allocation failures
were sufficient to put ksmbd into a state where every subsequent
connection attempt was rejected for the remainder of the boot.
ksmbd_kthread_fn() increments active_num_conn before calling
ksmbd_tcp_new_connection() and discards the return value, so when
alloc_transport() returns NULL the socket is released and -ENOMEM
returned without decrementing the counter. Each such failure
permanently consumes one slot from the max_connections pool; once
cumulative failures reach the cap, atomic_inc_return() hits the
threshold on every subsequent accept and every new connection is
rejected. The counter is only reset by module reload.
An unauthenticated remote attacker can drive the server toward the
memory pressure that makes alloc_transport() fail by holding open
connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN
(0x00FFFFFF); natural transient allocation failures on a loaded
host produce the same drift more slowly.
Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the
alloc_transport() failure path, decrement active_num_conn gated on
server_conf.max_connections.
Repro details: with the patch reverted, forced alloc_transport()
NULL returns leaked counter slots and subsequent connection
attempts -- including legitimate connects issued after the
forced-fail window had closed -- were all rejected with "Limit the
maximum number of connections". With this patch applied, the same
connect sequence produces no rejections and the counter cycles
cleanly between zero and one on every accept. |
| An input validation issue was addressed. This issue is fixed in iOS 18.3 and iPadOS 18.3, macOS Sequoia 15.3, macOS Sonoma 14.7.5, macOS Ventura 13.7.5, tvOS 18.3, visionOS 2.3. An attacker on the local network may be able to corrupt process memory. |
| The issue was addressed with improved checks. This issue is fixed in iOS 18.3 and iPadOS 18.3, iPadOS 17.7.4, macOS Sequoia 15.3, macOS Sonoma 14.7.3, tvOS 18.3, visionOS 2.3, watchOS 11.3. Parsing a file may lead to an unexpected app termination. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.35.11, 1.36.7, 1.37.3, and 1.38.1, a vulnerability in Envoy's HTTP/2 downstream request processing allows an unauthenticated remote client to trigger excessive memory consumption, potentially resulting in OOM termination of the Envoy process and denial of service. The issue arises from the combination of two behaviors. First, cookie header bytes are not fully accounted for during request header size validation in Envoy. Second, HPACK header block limits in oghttp2/quiche are enforced on encoded bytes without a corresponding limit on total decoded header size. Together, these behaviors allow a malicious client to cause large decoded header allocations while bypassing the intended request header size protections. Versions 1.35.11, 1.36.7, 1.37.3, and 1.38.1 contain a fix. No complete workaround is known short of applying a fix. Possible temporary mitigations include disabling downstream HTTP/2 where operationally feasible; enforcing stricter request header and cookie limits before traffic reaches Envoy; and monitoring Envoy memory usage for abnormal growth under HTTP/2 traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
pnfs/flexfiles: Fix memory leak in nfs4_ff_alloc_deviceid_node()
In nfs4_ff_alloc_deviceid_node(), if the allocation for ds_versions fails,
the function jumps to the out_scratch label without freeing the already
allocated dsaddrs list, leading to a memory leak.
Fix this by jumping to the out_err_drain_dsaddrs label, which properly
frees the dsaddrs list before cleaning up other resources. |
