| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FaceSentry 6.4.8 contains an authenticated remote command injection vulnerability in pingTest.php and tcpPortTest.php scripts. Attackers can exploit unsanitized input parameters to inject and execute arbitrary shell commands with root privileges by manipulating the 'strInIP' and 'strInPort' parameters. |
| Ollama downloadBlob Improper Validation of Array Index Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Ollama. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the downloadBlob function. The issue results from the lack of proper validation of user-supplied data, which can result in a memory access past the end of an allocated array. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-27277. |
| NetComm NF20MESH routers running firmware R6B031 and earlier contain an authenticated remote code execution vulnerability that allows authenticated attackers to execute arbitrary commands as root by injecting shell metacharacters into the username JSON parameter processed by the dalStorage_addUserAccount function. Attackers can exploit the unsafe concatenation of user-supplied input into a shell command string passed to rut_doSystemAction without sanitization to achieve full root-level command execution on the underlying operating system. |
| bt_iso_recv() in subsys/bluetooth/host/iso.c pulled the ISO SDU header (4 bytes) or, when the timestamp flag is set, the timestamped SDU header (8 bytes) from the inbound HCI ISO Data buffer via net_buf_pull_mem() without first checking buf->len. The upstream hci_iso() handler enforces buf->len == the controller-declared ISO Data_Load length, so a malicious or buggy controller / adjacent BLE peer on an established CIS/BIS can present a first-fragment (BT_ISO_START) or single (BT_ISO_SINGLE) PDU shorter than the SDU header. Because net_buf_simple_pull_mem only guards length with __ASSERT_NO_MSG (compiled out when CONFIG_ASSERT is disabled, the production default), the pull underflows buf->len (uint16_t, e.g. 0 - 8 = 0xFFF8) and advances buf->data past valid data: the subsequent reads of hdr->slen and hdr->sn are out-of-bounds reads of adjacent pool memory. For the multi-fragment (START) case the corrupted buffer is retained as iso->rx, and a following CONT/END fragment's net_buf_tailroom() guard underflows to a near-SIZE_MAX value, defeating the bounds check and causing net_buf_add_mem() to memcpy attacker-supplied fragment data far past the RX pool buffer (out-of-bounds write). The flaw affects ISO receive builds (CONFIG_BT_ISO_RX, selected by the default-off LE Audio options BT_ISO_PERIPHERAL/BT_ISO_CENTRAL/BT_ISO_SYNC_RECEIVER) and has existed since the ISO subsystem was introduced (v2.6.0) through v4.4.0. The fix adds explicit buf->len < sizeof(ts_hdr) and buf->len < sizeof(hdr) checks that drop the buffer before pulling. |
| The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous (DMA) receive path. When uart_rx_enable() is invoked with a one-byte receive buffer (len == 1) and CONFIG_UART_MCHP_ASYNC is enabled, the RX-complete ISR starts a single-beat DMA transfer while a received byte is already pending in the SERCOM DATA register. On this SoC the peripheral-triggered DMA start sequencing then writes one byte past the end of the caller-supplied buffer (CWE-787).
The overflowed byte's value is the UART RX data supplied by the connected serial peer (adjacent attacker), while its size and location are fixed at one byte immediately after the buffer.
Exploitation requires the async UART config (not enabled by default on the in-tree PIC32CM-JH boards) and a consumer that enables RX with a one-byte buffer; impact is limited single-byte memory corruption adjacent to the RX buffer (possible crash / denial of service).
The defect shipped in v4.4.0. The fix reads the first byte with the CPU and, for one-byte buffers, performs no DMA at all; for larger buffers it sizes the DMA for the remaining len-1 bytes. |
| Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg->msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer.
Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer.
The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet.
The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0. |
| Memory allocation with excessive size value in Windows Local Security Authority Subsystem Service (LSASS) allows an unauthorized attacker to deny service over a network. |
| On Xtensa SoCs built with CONFIG_XTENSA_MPU and CONFIG_USERSPACE, arch_buffer_validate() in arch/xtensa/core/mpu.c — the architecture hook that verifies a user-mode-supplied buffer is accessible to the calling user thread with the requested permission — defaulted its return value to 0 (access permitted) and only set a denial result inside its per-MPU-region probe loop. When the rounded extent of the buffer wraps the 32-bit address space (size + alignment offset near SIZE_MAX, or ROUND_UP(size + offset) overflowing to 0), the loop executes zero iterations and the function returns 0 = permitted without probing any MPU region.
The syscall-layer pre-checks (K_SYSCALL_MEMORY_SIZE_CHECK / Z_DETECT_POINTER_OVERFLOW) only catch a raw addr+size wrap and do not cover the ROUND_UP-induced wrap, and the string path (arch_user_string_nlen -> arch_buffer_validate) has no syscall-layer guard at all.
An unprivileged user-mode thread can therefore pass a crafted (addr, size) to any syscall that validates user buffers via k_usermode_from_copy/to_copy or k_usermode_string_copy and have validation succeed for memory it must not access; the kernel then reads from (disclosure) or, with write=1, writes to (corruption) attacker-chosen kernel or other-partition memory on the thread's behalf, enabling information disclosure, memory corruption, privilege escalation, and denial of service.
Affected from v3.7.0 (when Xtensa MPU userspace support was added) through v4.4.0. The fix changes the default to -EINVAL (deny by default), adds an explicit size_add_overflow check, and sets the success value only after the full range has been validated. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Apache Kylin. A backend API may bring job config parameters to OS command line.
This issue affects Apache Kylin: from 4 through 5.0.3.
Users are recommended to upgrade to version 5.0.4, which fixes the issue. |
| A vulnerability was determined in Comfast CF-WR631AX V3 up to 2.7.0.8. Affected by this vulnerability is the function system_wl_upload_pic_file of the file /usr/bin/webmgnt of the component FastCGI Backend. This manipulation of the argument filename causes os command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in TRENDnet TEW-821DAP 1.11B03. The impacted element is the function sub_43F2C4 of the file /goform/tools_nslookup of the component DNS Lookup Handler. This manipulation of the argument nslookup_target/dns_server causes os command injection. The attack can be initiated remotely. The vendor explains: "We are unable to confirm the existence of the vulnerabilities for (...) TEW-821DAP (v1.0R) as these items have been EOL. " This vulnerability only affects products that are no longer supported by the maintainer. |
| The MBStorage DRAM lighting control module within Gigabyte Control Center (GCC) developed by GIGABYTE Technology has an Improper Access Control vulnerability. Authenticated local attackers can send specific IOCTL commands through the driver MyPortIO_x64.sys bundled with the module, thereby arbitrarily reading and writing physical memory and obtaining kernel-level privileges. |
| A security issue exists within Arena® Simulation due to a memory corruption vulnerability in the model.exe (Siman) component. The vulnerability stems from improper validation of user-supplied data, which can result in an out-of-bounds write. An attacker could leverage this vulnerability to execute arbitrary code in the context of the current process by convincing a user to open a malicious file. |
| A security issue exists within Arena® Simulation due to a memory corruption vulnerability in the expmt.exe (Siman) component. The vulnerability stems from improper validation of user-supplied data, which can result in an out-of-bounds write. An attacker could leverage this vulnerability to execute arbitrary code in the context of the current process by convincing a user to open a malicious file. |
| A security issue exists within Arena® Simulation due to a memory corruption vulnerability in the linker.exe (Siman) component. The vulnerability stems from improper validation of user-supplied data, which can result in an out-of-bounds write. An attacker could leverage this vulnerability to execute arbitrary code in the context of the current process by convincing a user to open a malicious file. |
| A security issue exists within Arena® Simulation due to a memory corruption vulnerability in the siman.exe (Siman) component. The vulnerability stems from improper validation of user-supplied data, which can result in an out-of-bounds write. An attacker could leverage this vulnerability to execute arbitrary code in the context of the current process by convincing a user to open a malicious file. |
| A vulnerability was found in louisho5 picobot up to 0.2.0. This issue affects the function ExecTool.Execute of the file internal/agent/tools/exec.go of the component exec Tool. The manipulation results in os command injection. The attack requires a local approach. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| SAP NetWeaver Application Server ABAP allows an authenticated attacker to leverage logical errors in memory management to cause a memory corruption that could lead to unauthorized data access, modification, or system unavailability. This has high impact on confidentiality, integrity, and availability of the application. |
| NanaZip is the 7-Zip derivative intended for the modern Windows experience. Prior to 6.5.1749.0, NanaZip's WebAssembly archive handler in NanaZip.Codecs.Archive.WebAssembly.cpp allocates buffers from attacker-controlled 32-bit section and custom-name length fields without validating them against the data present in the file. A tiny crafted module can force multi-gigabyte allocations during listing or extraction through NameSize, Information.Size, and std::string or vector allocation paths, causing memory exhaustion or process termination. This issue is fixed in version 6.5.1749.0. |
| Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, under certain non-default configurations, processing of PDF uploads could be exploited to obtain RCE on the server. This issue is patched in 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5. |
