| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers. |
| File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. Prior to 2.63.6, unchecked passwords maximums allow for an arbitrarily large password to be passed into the login API. This spikes CPU and memory, and after testing, crashes, heavily lags any container created, and has even made my docker daemon start to send errors with status code 500 even after the container was destroyed. This vulnerability is fixed in 2.63.6. |
| Improper input validation in the PAM AD discovery endpoints in
Devolutions Server 2026.2.4.0 through 2026.2.7.0 allows an authenticated
user with the UserGroupsView permission to coerce server-side
authentication to an attacker-controlled host, exposing PAM provider
credentials as a NTLMv2 challenge-response, via a crafted DomainName
parameter. |
| Insufficient validation of untrusted input in Navigation in Google Chrome prior to 149.0.7827.197 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::ReentrantReadWriteLock can incorrectly grant a write lock after one thread acquires the read lock 32,768 times. The lock stores a thread's local read and write hold counts in one integer. The low 15 bits are used for the read hold count, and bit 15 is used as WRITE_LOCK_HELD. After 32,768 reentrant read acquisitions, the local read count crosses into the write-lock bit. try_write_lock then treats the thread as already holding a write lock and returns true without setting the global RUNNING_WRITER bit. This breaks the core mutual-exclusion guarantee: the caller is told it has a write lock, but other threads can still hold or acquire read locks at the same time. This vulnerability is fixed in 1.3.7. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 22.0.1, 21.2.17, and 20.3.25, a Denial of Service (DoS) vulnerability exists in the @angular/common package of the Angular framework. The formatDate function, which is also utilized by the standard Angular DatePipe, does not properly limit or validate the length of the format parameter. When parsing a maliciously crafted, excessively long date format string (e.g., a repeating pattern or very large string), the internal parser splits the string iteratively using a regular expression loop. This results in uncontrolled resource consumption (high CPU utilization and excessive memory allocations), leading to a Denial of Service (DoS). This vulnerability is fixed in 22.0.1, 21.2.17, and 20.3.25. |
| Python-Multipart is a streaming multipart parser for Python. Prior to 0.0.30, QuerystringParser treated ; as a field separator in application/x-www-form-urlencoded bodies, in addition to &. The WHATWG URL standard, modern browsers, and Python's urllib.parse (since the CVE-2021-23336 fix) treat only & as a separator. This creates a parser differential: the same bytes are tokenized into different fields than a WHATWG compliant intermediary would produce, allowing an attacker to smuggle extra form fields past an upstream body inspecting component. This vulnerability is fixed in 0.0.30. |
| Python-Multipart is a streaming multipart parser for Python. Prior to 0.0.30, parse_options_header parsed Content-Disposition (and Content-Type) headers with email.message.Message, which transparently applies RFC 2231/5987 decoding. The extended parameter syntax (filename*=charset'lang'value, name*=..., and the filename*0/filename*1 continuation form) is decoded and surfaced under the bare filename/name key, and overrides the plain parameter when both are present. RFC 7578 ยง4.2 explicitly forbids the filename* form in multipart/form-data. Components that follow RFC 7578, or that do not implement RFC 2231/5987 decoding for multipart/form-data (WAFs, proxies, gateways), may interpret such a header differently. An attacker can exploit that difference to smuggle a different field name or filename past an upstream inspector to the backend. This vulnerability is fixed in 0.0.30. |
| vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.23.1rc0, ll temperature validation gates use comparison operators (<, >), which silently evaluate to False for NaN and for positive Infinity in Python's IEEE 754 float semantics. Both values pass every guard and propagate to GPU sampling kernels, where they produce undefined behavior or CUDA errors that can crash the inference worker. This vulnerability is fixed in 0.23.1rc0. |
| Starlette is a lightweight ASGI framework/toolkit. Prior to 1.3.0, the HTTP request path is not validated before being used to reconstruct request.url. Because request.url is rebuilt by concatenating {scheme}://{host}{path} and re-parsing the result, a path that does not begin with / (for example @google.com) moves the authority boundary during re-parsing, so request.url.hostname and request.url.netloc become attacker-controlled. Code that reads request.url.hostname (rather than the Host header or scope) can therefore be misled into trusting an attacker-supplied host. This vulnerability is fixed in 1.3.0. |
| Python-Multipart is a streaming multipart parser for Python. Prior to 0.0.31, parse_form() did not validate the Content-Length header before using it to bound its chunked read of the request body. A negative Content-Length turned the bounded read into a read-until-EOF, so the entire body was loaded into memory in a single read instead of in fixed-size chunks. This vulnerability is fixed in 0.0.31. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value by validating catalog record size
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_read() only validates that entrylength is not greater than the
buffer size, but doesn't check if it's less than expected. It successfully
reads 26 bytes into a 520-byte structure and returns success, leaving 494
bytes uninitialized.
This uninitialized data in tmp.thread.nodeName then gets copied by
hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering
the KMSAN warning when the uninitialized bytes are used as array indices
in case_fold().
Fix by introducing hfsplus_brec_read_cat() wrapper that:
1. Calls hfs_brec_read() to read the data
2. Validates the record size based on the type field:
- Fixed size for folder and file records
- Variable size for thread records (depends on string length)
3. Returns -EIO if size doesn't match expected
For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading
nodeName.length to avoid reading uninitialized data at call sites that
don't zero-initialize the entry structure.
Also initialize the tmp variable in hfsplus_find_cat() as defensive
programming to ensure no uninitialized data even if validation is
bypassed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler
t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as
a loop bound over port_msg->data[] without checking that the message buffer
contains sufficient data. A modem sending port_count=65535 in a 12-byte
buffer triggers a slab-out-of-bounds read of up to 262140 bytes.
Add a sizeof(*port_msg) check before accessing the port message header
fields to guard against undersized messages.
Add a struct_size() check after extracting port_count and before the loop.
In t7xx_parse_host_rt_data(), guard the rt_feature header read with a
remaining-buffer check before accessing data_len, validate feat_data_len
against the actual remaining buffer to prevent OOB reads and signed
integer overflow on offset.
Pass msg_len from both call sites: skb->len at the DPMAIF path after
skb_pull(), and the validated feat_data_len at the handshake path. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require minimum ACE size in smb_check_perm_dacl()
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate the whole DACL before rewriting it in cifsacl
build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a
server-supplied dacloffset and then use the incoming ACL to rebuild the
chmod/chown security descriptor.
The original fix only checked that the struct smb_acl header fits before
reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate
header-field OOB read, but the rewrite helpers still walk ACEs based on
pdacl->num_aces with no structural validation of the incoming DACL body.
A malicious server can return a truncated DACL that still contains a
header, claims one or more ACEs, and then drive
replace_sids_and_copy_aces() or set_chmod_dacl() past the validated
extent while they compare or copy attacker-controlled ACEs.
Factor the DACL structural checks into validate_dacl(), extend them to
validate each ACE against the DACL bounds, and use the shared validator
before the chmod/chown rebuild paths. parse_dacl() reuses the same
validator so the read-side parser and write-side rewrite paths agree on
what constitutes a well-formed incoming DACL. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected. |
| Impact:
Undici's cache interceptor incorrectly classifies some responses as cacheable when the upstream Cache-Control header uses whitespace-padded qualified private or no-cache field names such as private=" authorization" or no-cache="\tauthorization". The parser preserves the surrounding whitespace, so later comparisons against the literal authorization field name fail and the response is stored.
In shared-cache mode, this allows a response containing one user's authenticated data to be served from cache to a subsequent caller, including an unauthenticated caller, when both requests resolve to the same cache key.
Affected applications are those that explicitly enable the cache interceptor (interceptors.cache()) in shared mode, forward Authorization headers upstream, and receive cacheable responses with non-canonical qualified private or no-cache directives.
Patches:
Upgrade to undici v7.28.0 or v8.5.0.
Workarounds:
If upgrade is not immediately possible, disable shared-cache mode for traffic that includes Authorization headers, avoid caching responses to authenticated requests, or add Vary: Authorization upstream. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject short ahash digests during instance creation
authencesn requires either a zero authsize or an authsize of at least
4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of
high-order sequence number data at the end of the authenticated data.
While crypto_authenc_esn_setauthsize() already rejects explicit
non-zero authsizes in the range 1..3, crypto_authenc_esn_create()
still copied auth->digestsize into inst->alg.maxauthsize without
validating it. The AEAD core then initialized the tfm's default
authsize from that value.
As a result, selecting an ahash with digest size 1..3, such as
cbcmac(cipher_null), exposed authencesn instances whose default
authsize was invalid even though setauthsize() would have rejected the
same value. AF_ALG could then trigger the ESN tail handling with a
too-short tag and hit an out-of-bounds access.
Reject authencesn instances whose ahash digest size is in the invalid
non-zero range 1..3 so that no tfm can inherit an unsupported default
authsize. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()
ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read
when the queue reader or writer index from hardware exceeds
REMOTE_QUEUE_SIZE (60).
A compromised service processor can trigger this by writing an
out-of-range value to the reader or writer MMIO register before
asserting an interrupt. Since writer is re-read from hardware on
every loop iteration, it can also be set to an out-of-range value
after the loop has already started.
The root cause is that get_queue_reader() and get_queue_writer() return
raw readl() values that are passed directly into get_queue_entry(),
which computes:
queue_begin + reader * sizeof(struct remote_input)
with no bounds check. This unchecked MMIO address is then passed to
memcpy_fromio(), reading 8 bytes from unintended device registers.
For sufficiently large values the address falls outside the PCI BAR
mapping entirely, triggering a machine check exception.
Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of
the loop body, before any call to get_queue_entry(). On an out-of-range
value, reset the reader register to 0 via set_queue_reader() before
breaking, so that normal queue operation can resume if the corrupted
hardware state is transient. |
